3.142 Rad/s to RPM Converter
Instant conversion for 3.142 rad/s to RPM (30.0001 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 30.00007
- Degrees per Second (°/s)
- 180.00042 °/s
- Hertz (Hz)
- 0.500001 Hz
- Revolutions per Second (RPS)
- 0.500001 rev/s
- Revolutions per Hour (RPH)
- 1,800.0042 rev/hr
- Revolutions per Day
- 43,200.101 rev/day
- Radians per Minute (rad/min)
- 188.496 rad/min
- Milliradians per Second (mrad/s)
- 3,141.6 mrad/s
- Period (seconds per rev)
- 1.999995 s/rev
- Exact Formula
- 3.1416 × 30/π = 30.00007 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 3.142 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 3.1416 × (30 / π) = 30.0001 RPM
Exact fraction: (3.1416 × 30)/π RPM · Reciprocal: 30 RPM × (π/30) = 3.142 rad/s
Forward Conversion: 30 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
3.1416 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
3.1416 rad/s = 94.248/π RPM ≈ 30.00007 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 30.0023 RPM instead of the exact 30.0001 RPM — an error of 0.00221 RPM.
What this speed looks like in practice
At 30.0001 RPM a shaft turns about 2× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.11× faster.
Revolutions over time
That is 1,800 revolutions per hour and 43,200 per day. A quarter turn (90°) takes 500 ms, and the shaft sweeps 0.18° every millisecond.
Rim speed and centripetal load at ω = 3.1416 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.03142 m/s · 0.1131 km/h | 0.0987 m/s² · 0.01006 g |
| 5 cm | 10 cm | 0.1571 m/s · 0.5655 km/h | 0.4935 m/s² · 0.05032 g |
| 10 cm | 20 cm | 0.3142 m/s · 1.131 km/h | 0.987 m/s² · 0.1006 g |
| 25 cm | 50 cm | 0.7854 m/s · 2.827 km/h | 2.467 m/s² · 0.2516 g |
| 50 cm | 1 m | 1.571 m/s · 5.655 km/h | 4.935 m/s² · 0.5032 g |
| 1 m | 2 m | 3.142 m/s · 11.31 km/h | 9.87 m/s² · 1.006 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 30 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.5 Hz | Below typical VFD range — use a gearbox |
| 4 | 1 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.5 Hz | Below typical VFD range — use a gearbox |
| 8 | 2 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 10 RPM · 1.047 rad/s | ×3 |
| 5:1 | 6 RPM · 0.6283 rad/s | ×5 |
| 10:1 | 3 RPM · 0.3142 rad/s | ×10 |
| 30:1 | 1 RPM · 0.1047 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.004935 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.04935 J |
| 0.1 kg·m² (car flywheel) | 0.4935 J |
| 1 kg·m² (industrial flywheel) | 4.935 J |
Multiples of this speed
- 0.5× = 1.5708 rad/s15 RPM
- 2× = 6.2832 rad/s60.0001 RPM
- 5× = 15.708 rad/s150.0004 RPM
- 10× = 31.416 rad/s300.0007 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 3.142 radians per second to RPM, multiply 3.1416 by 30 and divide by π: 3.1416 × (30 / π) = 30.0001 RPM (approx. 30 RPM).
3.142 rad/s equals 0.5000 Hz (revolutions per second), calculated by dividing 3.1416 by 2π (approx. 6.283185).
To convert 30 RPM back to radians per second, multiply by π and divide by 30: 30 × (π / 30) ≈ 3.142 rad/s.
At 3.142 rad/s, one full 360° revolution takes 2 seconds (2000.00 ms).
3.142 rad/s is 30.0001 RPM, which a 4-pole induction motor reaches synchronously at 1 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 3.1416 rad/s × 0.1 m = 0.3142 m/s (1.131 km/h), with a centripetal acceleration of ω²·r = 0.987 m/s².