6.283 Rad/s to RPM Converter
Instant conversion for 6.283 rad/s to RPM (60.0001 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 60.00014
- Degrees per Second (°/s)
- 360.00084 °/s
- Hertz (Hz)
- 1.000002 Hz
- Revolutions per Second (RPS)
- 1.000002 rev/s
- Revolutions per Hour (RPH)
- 3,600.0084 rev/hr
- Revolutions per Day
- 86,400.202 rev/day
- Radians per Minute (rad/min)
- 376.992 rad/min
- Milliradians per Second (mrad/s)
- 6,283.2 mrad/s
- Period (seconds per rev)
- 0.999998 s/rev
- Exact Formula
- 6.2832 × 30/π = 60.00014 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 6.283 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 6.2832 × (30 / π) = 60.0001 RPM
Exact fraction: (6.2832 × 30)/π RPM · Reciprocal: 60 RPM × (π/30) = 6.283 rad/s
Forward Conversion: 60 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
6.2832 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
6.2832 rad/s = 188.496/π RPM ≈ 60.00014 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 60.0046 RPM instead of the exact 60.0001 RPM — an error of 0.00442 RPM.
What this speed looks like in practice
At 60.0001 RPM a shaft turns about 1.33× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.33× faster.
Revolutions over time
That is 3,600 revolutions per hour and 86,400 per day. A quarter turn (90°) takes 250 ms, and the shaft sweeps 0.36° every millisecond.
Rim speed and centripetal load at ω = 6.2832 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.06283 m/s · 0.2262 km/h | 0.3948 m/s² · 0.04026 g |
| 5 cm | 10 cm | 0.3142 m/s · 1.131 km/h | 1.974 m/s² · 0.2013 g |
| 10 cm | 20 cm | 0.6283 m/s · 2.262 km/h | 3.948 m/s² · 0.4026 g |
| 25 cm | 50 cm | 1.571 m/s · 5.655 km/h | 9.87 m/s² · 1.006 g |
| 50 cm | 1 m | 3.142 m/s · 11.31 km/h | 19.74 m/s² · 2.013 g |
| 1 m | 2 m | 6.283 m/s · 22.62 km/h | 39.48 m/s² · 4.026 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 60 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1 Hz | Below typical VFD range — use a gearbox |
| 4 | 2 Hz | Below typical VFD range — use a gearbox |
| 6 | 3 Hz | Below typical VFD range — use a gearbox |
| 8 | 4 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 20 RPM · 2.094 rad/s | ×3 |
| 5:1 | 12 RPM · 1.257 rad/s | ×5 |
| 10:1 | 6 RPM · 0.6283 rad/s | ×10 |
| 30:1 | 2 RPM · 0.2094 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01974 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1974 J |
| 0.1 kg·m² (car flywheel) | 1.974 J |
| 1 kg·m² (industrial flywheel) | 19.74 J |
Multiples of this speed
- 0.5× = 3.1416 rad/s30.0001 RPM
- 2× = 12.5664 rad/s120.0003 RPM
- 5× = 31.416 rad/s300.0007 RPM
- 10× = 62.832 rad/s600.0014 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 6.283 radians per second to RPM, multiply 6.2832 by 30 and divide by π: 6.2832 × (30 / π) = 60.0001 RPM (approx. 60 RPM).
6.283 rad/s equals 1.0000 Hz (revolutions per second), calculated by dividing 6.2832 by 2π (approx. 6.283185).
To convert 60 RPM back to radians per second, multiply by π and divide by 30: 60 × (π / 30) ≈ 6.283 rad/s.
At 6.283 rad/s, one full 360° revolution takes 1 seconds (1000.00 ms).
6.283 rad/s is 60.0001 RPM, which a 4-pole induction motor reaches synchronously at 2 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 6.2832 rad/s × 0.1 m = 0.6283 m/s (2.262 km/h), with a centripetal acceleration of ω²·r = 3.9479 m/s².