1 Rad/s to RPM Converter
Instant conversion for 1 rad/s to RPM (9.5493 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 9.549297
- Degrees per Second (°/s)
- 57.29578 °/s
- Hertz (Hz)
- 0.159155 Hz
- Revolutions per Second (RPS)
- 0.159155 rev/s
- Revolutions per Hour (RPH)
- 572.9578 rev/hr
- Revolutions per Day
- 13,750.987 rev/day
- Radians per Minute (rad/min)
- 60 rad/min
- Milliradians per Second (mrad/s)
- 1,000 mrad/s
- Period (seconds per rev)
- 6.283185 s/rev
- Exact Formula
- 1 × 30/π = 9.549297 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 1 × (30 / π) = 9.5493 RPM
Exact fraction: (1 × 30)/π RPM · Reciprocal: 9.549 RPM × (π/30) = 1 rad/s
Forward Conversion: 10 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
1 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
1 rad/s = 30/π RPM ≈ 9.549297 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 9.55 RPM instead of the exact 9.5493 RPM — an error of 0.0007034 RPM.
What this speed looks like in practice
At 9.5493 RPM a shaft turns about 9.55× as fast as a clock's second hand. A utility-scale wind turbine rotor turns about 1.57× faster.
Revolutions over time
That is 572.96 revolutions per hour and 13,751 per day. A quarter turn (90°) takes 1.57 s, and the shaft sweeps 0.0573° every millisecond.
Rim speed and centripetal load at ω = 1 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.01 m/s · 0.036 km/h | 0.01 m/s² · 0.00102 g |
| 5 cm | 10 cm | 0.05 m/s · 0.18 km/h | 0.05 m/s² · 0.005099 g |
| 10 cm | 20 cm | 0.1 m/s · 0.36 km/h | 0.1 m/s² · 0.0102 g |
| 25 cm | 50 cm | 0.25 m/s · 0.9 km/h | 0.25 m/s² · 0.02549 g |
| 50 cm | 1 m | 0.5 m/s · 1.8 km/h | 0.5 m/s² · 0.05099 g |
| 1 m | 2 m | 1 m/s · 3.6 km/h | 1 m/s² · 0.102 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 9.55 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.1592 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.3183 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.4775 Hz | Below typical VFD range — use a gearbox |
| 8 | 0.6366 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 3.183 RPM · 0.3333 rad/s | ×3 |
| 5:1 | 1.91 RPM · 0.2 rad/s | ×5 |
| 10:1 | 0.9549 RPM · 0.1 rad/s | ×10 |
| 30:1 | 0.3183 RPM · 0.03333 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.0005 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.005 J |
| 0.1 kg·m² (car flywheel) | 0.05 J |
| 1 kg·m² (industrial flywheel) | 0.5 J |
Multiples of this speed
- 0.5× = 0.5 rad/s4.7746 RPM
- 2× = 2 rad/s19.0986 RPM
- 5× = 5 rad/s47.7465 RPM
- 10× = 10 rad/s95.493 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1 radians per second to RPM, multiply 1 by 30 and divide by π: 1 × (30 / π) = 9.5493 RPM (approx. 9.549 RPM).
1 rad/s equals 0.1592 Hz (revolutions per second), calculated by dividing 1 by 2π (approx. 6.283185).
To convert 9.549 RPM back to radians per second, multiply by π and divide by 30: 9.549 × (π / 30) ≈ 1 rad/s.
At 1 rad/s, one full 360° revolution takes 6.2832 seconds (6283.19 ms).
1 rad/s is 9.5493 RPM, which a 4-pole induction motor reaches synchronously at 0.3183 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 1 rad/s × 0.1 m = 0.1 m/s (0.36 km/h), with a centripetal acceleration of ω²·r = 0.1 m/s².