19 RPM to Radians Per Second Converter
Instant conversion for 19 RPM to rad/s (1.989675 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1.9896753
- Degrees per Second (°/s)
- 114 °/s
- Hertz (Hz)
- 0.316667 Hz
- Revolutions per Second (RPS)
- 0.316667 rev/s
- Revolutions per Hour (RPH)
- 1,140 rev/hr
- Revolutions per Day
- 27,360 rev/day
- Radians per Minute (rad/min)
- 119.38052 rad/min
- Milliradians per Second (mrad/s)
- 1,989.6753 mrad/s
- Period (seconds per rev)
- 3.157895 s/rev
- Exact Formula
- 19 × π/30 = 1.9896753 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 19 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 19 × (π / 30) = 1.989675 rad/s
Exact fraction: 19π/30 rad/s · Reciprocal: 1.99 rad/s × (30/π) = 19 RPM
Reverse Conversion: 1.99 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
19 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
19 RPM = 19π/30 rad/s ≈ 1.989675 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1.9893 rad/s instead of the exact 1.9897 rad/s — an error of 0.0003753 rad/s.
What this speed looks like in practice
At 19 RPM a shaft turns about 1.27× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.75× faster.
Revolutions over time
That is 1,140 revolutions per hour and 27,360 per day. A quarter turn (90°) takes 789 ms, and the shaft sweeps 0.114° every millisecond.
Rim speed and centripetal load at ω = 1.9897 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.0199 m/s · 0.07163 km/h | 0.03959 m/s² · 0.004037 g |
| 5 cm | 10 cm | 0.09948 m/s · 0.3581 km/h | 0.1979 m/s² · 0.02018 g |
| 10 cm | 20 cm | 0.199 m/s · 0.7163 km/h | 0.3959 m/s² · 0.04037 g |
| 25 cm | 50 cm | 0.4974 m/s · 1.791 km/h | 0.9897 m/s² · 0.1009 g |
| 50 cm | 1 m | 0.9948 m/s · 3.581 km/h | 1.979 m/s² · 0.2018 g |
| 1 m | 2 m | 1.99 m/s · 7.163 km/h | 3.959 m/s² · 0.4037 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 19 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.3167 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.6333 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.95 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.267 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 6.333 RPM · 0.6632 rad/s | ×3 |
| 5:1 | 3.8 RPM · 0.3979 rad/s | ×5 |
| 10:1 | 1.9 RPM · 0.199 rad/s | ×10 |
| 30:1 | 0.6333 RPM · 0.06632 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.001979 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.01979 J |
| 0.1 kg·m² (car flywheel) | 0.1979 J |
| 1 kg·m² (industrial flywheel) | 1.979 J |
Multiples of this speed
- 0.5× = 9.5 RPM0.9948 rad/s
- 2× = 38 RPM3.9794 rad/s
- 5× = 95 RPM9.9484 rad/s
- 10× = 190 RPM19.8968 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 19 RPM to radians per second, multiply 19 by π and divide by 30: 19 × (π / 30) = 1.989675 rad/s (approx. 1.99 rad/s).
19 RPM equals 0.3167 Hz (revolutions per second), calculated by dividing 19 by 60 seconds.
To convert 1.99 rad/s back to RPM, multiply by 30 and divide by π: 1.99 × (30 / π) ≈ 19 RPM.
At 19 RPM, one full 360° revolution takes 3.1579 seconds (3157.89 ms).
A 4-pole induction motor has a synchronous speed of 19 RPM at 0.6333 Hz (f = RPM × poles / 120 = 19 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 1.989675 rad/s × 0.1 m = 0.199 m/s (0.7163 km/h). The centripetal acceleration at the rim is ω²·r = 0.3959 m/s².