18 RPM to Radians Per Second Converter
Instant conversion for 18 RPM to rad/s (1.884956 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1.8849556
- Degrees per Second (°/s)
- 108 °/s
- Hertz (Hz)
- 0.3 Hz
- Revolutions per Second (RPS)
- 0.3 rev/s
- Revolutions per Hour (RPH)
- 1,080 rev/hr
- Revolutions per Day
- 25,920 rev/day
- Radians per Minute (rad/min)
- 113.09734 rad/min
- Milliradians per Second (mrad/s)
- 1,884.9556 mrad/s
- Period (seconds per rev)
- 3.333333 s/rev
- Exact Formula
- 18 × π/30 = 1.8849556 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 18 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 18 × (π / 30) = 1.884956 rad/s
Exact fraction: 18π/30 rad/s · Reciprocal: 1.885 rad/s × (30/π) = 18 RPM
Reverse Conversion: 1.885 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
18 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
18 RPM = 3π/5 rad/s ≈ 1.884956 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1.8846 rad/s instead of the exact 1.885 rad/s — an error of 0.0003556 rad/s.
What this speed looks like in practice
At 18 RPM a shaft turns about 1.2× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.85× faster.
Revolutions over time
That is 1,080 revolutions per hour and 25,920 per day. A quarter turn (90°) takes 833 ms, and the shaft sweeps 0.108° every millisecond.
Rim speed and centripetal load at ω = 1.885 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.01885 m/s · 0.06786 km/h | 0.03553 m/s² · 0.003623 g |
| 5 cm | 10 cm | 0.09425 m/s · 0.3393 km/h | 0.1777 m/s² · 0.01812 g |
| 10 cm | 20 cm | 0.1885 m/s · 0.6786 km/h | 0.3553 m/s² · 0.03623 g |
| 25 cm | 50 cm | 0.4712 m/s · 1.696 km/h | 0.8883 m/s² · 0.09058 g |
| 50 cm | 1 m | 0.9425 m/s · 3.393 km/h | 1.777 m/s² · 0.1812 g |
| 1 m | 2 m | 1.885 m/s · 6.786 km/h | 3.553 m/s² · 0.3623 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 18 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.3 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.6 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.9 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.2 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 6 RPM · 0.6283 rad/s | ×3 |
| 5:1 | 3.6 RPM · 0.377 rad/s | ×5 |
| 10:1 | 1.8 RPM · 0.1885 rad/s | ×10 |
| 30:1 | 0.6 RPM · 0.06283 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.001777 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.01777 J |
| 0.1 kg·m² (car flywheel) | 0.1777 J |
| 1 kg·m² (industrial flywheel) | 1.777 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 18 RPM to radians per second, multiply 18 by π and divide by 30: 18 × (π / 30) = 1.884956 rad/s (approx. 1.885 rad/s).
18 RPM equals 0.3000 Hz (revolutions per second), calculated by dividing 18 by 60 seconds.
To convert 1.885 rad/s back to RPM, multiply by 30 and divide by π: 1.885 × (30 / π) ≈ 18 RPM.
At 18 RPM, one full 360° revolution takes 3.3333 seconds (3333.33 ms).
A 4-pole induction motor has a synchronous speed of 18 RPM at 0.6 Hz (f = RPM × poles / 120 = 18 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 1.884956 rad/s × 0.1 m = 0.1885 m/s (0.6786 km/h). The centripetal acceleration at the rim is ω²·r = 0.3553 m/s².