14 RPM to Radians Per Second Converter
Instant conversion for 14 RPM to rad/s (1.466077 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1.4660766
- Degrees per Second (°/s)
- 84 °/s
- Hertz (Hz)
- 0.233333 Hz
- Revolutions per Second (RPS)
- 0.233333 rev/s
- Revolutions per Hour (RPH)
- 840 rev/hr
- Revolutions per Day
- 20,160 rev/day
- Radians per Minute (rad/min)
- 87.964594 rad/min
- Milliradians per Second (mrad/s)
- 1,466.0766 mrad/s
- Period (seconds per rev)
- 4.285714 s/rev
- Exact Formula
- 14 × π/30 = 1.4660766 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 14 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 14 × (π / 30) = 1.466077 rad/s
Exact fraction: 14π/30 rad/s · Reciprocal: 1.466 rad/s × (30/π) = 14 RPM
Reverse Conversion: 1.466 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
14 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
14 RPM = 7π/15 rad/s ≈ 1.466077 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1.4658 rad/s instead of the exact 1.4661 rad/s — an error of 0.0002766 rad/s.
What this speed looks like in practice
At 14 RPM a shaft turns about 14× as fast as a clock's second hand. A utility-scale wind turbine rotor turns about 1.07× faster.
Revolutions over time
That is 840 revolutions per hour and 20,160 per day. A quarter turn (90°) takes 1.07 s, and the shaft sweeps 0.084° every millisecond.
Rim speed and centripetal load at ω = 1.4661 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.01466 m/s · 0.05278 km/h | 0.02149 m/s² · 0.002192 g |
| 5 cm | 10 cm | 0.0733 m/s · 0.2639 km/h | 0.1075 m/s² · 0.01096 g |
| 10 cm | 20 cm | 0.1466 m/s · 0.5278 km/h | 0.2149 m/s² · 0.02192 g |
| 25 cm | 50 cm | 0.3665 m/s · 1.319 km/h | 0.5373 m/s² · 0.05479 g |
| 50 cm | 1 m | 0.733 m/s · 2.639 km/h | 1.075 m/s² · 0.1096 g |
| 1 m | 2 m | 1.466 m/s · 5.278 km/h | 2.149 m/s² · 0.2192 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 14 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.2333 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.4667 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.7 Hz | Below typical VFD range — use a gearbox |
| 8 | 0.9333 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 4.667 RPM · 0.4887 rad/s | ×3 |
| 5:1 | 2.8 RPM · 0.2932 rad/s | ×5 |
| 10:1 | 1.4 RPM · 0.1466 rad/s | ×10 |
| 30:1 | 0.4667 RPM · 0.04887 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.001075 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.01075 J |
| 0.1 kg·m² (car flywheel) | 0.1075 J |
| 1 kg·m² (industrial flywheel) | 1.075 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 14 RPM to radians per second, multiply 14 by π and divide by 30: 14 × (π / 30) = 1.466077 rad/s (approx. 1.466 rad/s).
14 RPM equals 0.2333 Hz (revolutions per second), calculated by dividing 14 by 60 seconds.
To convert 1.466 rad/s back to RPM, multiply by 30 and divide by π: 1.466 × (30 / π) ≈ 14 RPM.
At 14 RPM, one full 360° revolution takes 4.2857 seconds (4285.71 ms).
A 4-pole induction motor has a synchronous speed of 14 RPM at 0.4667 Hz (f = RPM × poles / 120 = 14 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 1.466077 rad/s × 0.1 m = 0.1466 m/s (0.5278 km/h). The centripetal acceleration at the rim is ω²·r = 0.2149 m/s².