32 RPM to Radians Per Second Converter
Instant conversion for 32 RPM to rad/s (3.351032 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 3.3510322
- Degrees per Second (°/s)
- 192 °/s
- Hertz (Hz)
- 0.533333 Hz
- Revolutions per Second (RPS)
- 0.533333 rev/s
- Revolutions per Hour (RPH)
- 1,920 rev/hr
- Revolutions per Day
- 46,080 rev/day
- Radians per Minute (rad/min)
- 201.06193 rad/min
- Milliradians per Second (mrad/s)
- 3,351.0322 mrad/s
- Period (seconds per rev)
- 1.875 s/rev
- Exact Formula
- 32 × π/30 = 3.3510322 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 32 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 32 × (π / 30) = 3.351032 rad/s
Exact fraction: 32π/30 rad/s · Reciprocal: 3.351 rad/s × (30/π) = 32 RPM
Reverse Conversion: 3.351 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
32 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
32 RPM = 16π/15 rad/s ≈ 3.351032 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 3.3504 rad/s instead of the exact 3.351 rad/s — an error of 0.0006322 rad/s.
What this speed looks like in practice
At 32 RPM a shaft turns about 2.13× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.04× faster.
Revolutions over time
That is 1,920 revolutions per hour and 46,080 per day. A quarter turn (90°) takes 469 ms, and the shaft sweeps 0.192° every millisecond.
Rim speed and centripetal load at ω = 3.351 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.03351 m/s · 0.1206 km/h | 0.1123 m/s² · 0.01145 g |
| 5 cm | 10 cm | 0.1676 m/s · 0.6032 km/h | 0.5615 m/s² · 0.05725 g |
| 10 cm | 20 cm | 0.3351 m/s · 1.206 km/h | 1.123 m/s² · 0.1145 g |
| 25 cm | 50 cm | 0.8378 m/s · 3.016 km/h | 2.807 m/s² · 0.2863 g |
| 50 cm | 1 m | 1.676 m/s · 6.032 km/h | 5.615 m/s² · 0.5725 g |
| 1 m | 2 m | 3.351 m/s · 12.06 km/h | 11.23 m/s² · 1.145 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 32 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.5333 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.067 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.6 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.133 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 10.67 RPM · 1.117 rad/s | ×3 |
| 5:1 | 6.4 RPM · 0.6702 rad/s | ×5 |
| 10:1 | 3.2 RPM · 0.3351 rad/s | ×10 |
| 30:1 | 1.067 RPM · 0.1117 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.005615 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.05615 J |
| 0.1 kg·m² (car flywheel) | 0.5615 J |
| 1 kg·m² (industrial flywheel) | 5.615 J |
Multiples of this speed
- 0.5× = 16 RPM1.6755 rad/s
- 2× = 64 RPM6.7021 rad/s
- 5× = 160 RPM16.7552 rad/s
- 10× = 320 RPM33.5103 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 32 RPM to radians per second, multiply 32 by π and divide by 30: 32 × (π / 30) = 3.351032 rad/s (approx. 3.351 rad/s).
32 RPM equals 0.5333 Hz (revolutions per second), calculated by dividing 32 by 60 seconds.
To convert 3.351 rad/s back to RPM, multiply by 30 and divide by π: 3.351 × (30 / π) ≈ 32 RPM.
At 32 RPM, one full 360° revolution takes 1.875 seconds (1875.00 ms).
A 4-pole induction motor has a synchronous speed of 32 RPM at 1.0667 Hz (f = RPM × poles / 120 = 32 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 3.351032 rad/s × 0.1 m = 0.3351 m/s (1.2064 km/h). The centripetal acceleration at the rim is ω²·r = 1.1229 m/s².