72 RPM to Radians Per Second Converter
Instant conversion for 72 RPM to rad/s (7.539822 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 7.5398224
- Degrees per Second (°/s)
- 432 °/s
- Hertz (Hz)
- 1.2 Hz
- Revolutions per Second (RPS)
- 1.2 rev/s
- Revolutions per Hour (RPH)
- 4,320 rev/hr
- Revolutions per Day
- 103,680 rev/day
- Radians per Minute (rad/min)
- 452.38934 rad/min
- Milliradians per Second (mrad/s)
- 7,539.8224 mrad/s
- Period (seconds per rev)
- 0.833333 s/rev
- Exact Formula
- 72 × π/30 = 7.5398224 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 72 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 72 × (π / 30) = 7.539822 rad/s
Exact fraction: 72π/30 rad/s · Reciprocal: 7.54 rad/s × (30/π) = 72 RPM
Reverse Conversion: 7.54 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
72 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
72 RPM = 12π/5 rad/s ≈ 7.539822 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 7.5384 rad/s instead of the exact 7.5398 rad/s — an error of 0.001422 rad/s.
What this speed looks like in practice
At 72 RPM a shaft turns about 1.6× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.78× faster.
Revolutions over time
That is 4,320 revolutions per hour and 103,680 per day. A quarter turn (90°) takes 208 ms, and the shaft sweeps 0.432° every millisecond.
Rim speed and centripetal load at ω = 7.5398 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.0754 m/s · 0.2714 km/h | 0.5685 m/s² · 0.05797 g |
| 5 cm | 10 cm | 0.377 m/s · 1.357 km/h | 2.842 m/s² · 0.2898 g |
| 10 cm | 20 cm | 0.754 m/s · 2.714 km/h | 5.685 m/s² · 0.5797 g |
| 25 cm | 50 cm | 1.885 m/s · 6.786 km/h | 14.21 m/s² · 1.449 g |
| 50 cm | 1 m | 3.77 m/s · 13.57 km/h | 28.42 m/s² · 2.898 g |
| 1 m | 2 m | 7.54 m/s · 27.14 km/h | 56.85 m/s² · 5.797 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 72 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.2 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.4 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.6 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.8 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 24 RPM · 2.513 rad/s | ×3 |
| 5:1 | 14.4 RPM · 1.508 rad/s | ×5 |
| 10:1 | 7.2 RPM · 0.754 rad/s | ×10 |
| 30:1 | 2.4 RPM · 0.2513 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02842 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2842 J |
| 0.1 kg·m² (car flywheel) | 2.842 J |
| 1 kg·m² (industrial flywheel) | 28.42 J |
Multiples of this speed
- 0.5× = 36 RPM3.7699 rad/s
- 2× = 144 RPM15.0796 rad/s
- 5× = 360 RPM37.6991 rad/s
- 10× = 720 RPM75.3982 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 72 RPM to radians per second, multiply 72 by π and divide by 30: 72 × (π / 30) = 7.539822 rad/s (approx. 7.54 rad/s).
72 RPM equals 1.2000 Hz (revolutions per second), calculated by dividing 72 by 60 seconds.
To convert 7.54 rad/s back to RPM, multiply by 30 and divide by π: 7.54 × (30 / π) ≈ 72 RPM.
At 72 RPM, one full 360° revolution takes 0.8333 seconds (833.33 ms).
A 4-pole induction motor has a synchronous speed of 72 RPM at 2.4 Hz (f = RPM × poles / 120 = 72 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 7.539822 rad/s × 0.1 m = 0.754 m/s (2.7143 km/h). The centripetal acceleration at the rim is ω²·r = 5.6849 m/s².