RPM to Radians Per SecondRPM to rad/s

12.566 Rad/s to RPM Converter

Instant conversion for 12.566 rad/s to RPM (120.0003 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result120.00028 RPM
RPM
120.00028
Degrees per Second (°/s)
720.00168 °/s
Hertz (Hz)
2.000005 Hz
Revolutions per Second (RPS)
2.000005 rev/s
Revolutions per Hour (RPH)
7,200.0168 rev/hr
Revolutions per Day
172,800.4 rev/day
Radians per Minute (rad/min)
753.984 rad/min
Milliradians per Second (mrad/s)
12,566.4 mrad/s
Period (seconds per rev)
0.499999 s/rev
Exact Formula
12.5664 × 30/π = 120.00028 RPM
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):12.566400 rad/s
Rounded (0.10472):12.566429 rad/s
Angular Error / Hour:6.06° / hr

Worked Conversion: 12.566 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 12.5664 × (30 / π) = 120.0003 RPM

Exact fraction: (12.5664 × 30)/π RPM · Reciprocal: 120 RPM × (π/30) = 12.566 rad/s

Rotational Speed
120.0003 RPM
Frequency
2 Hz
Degrees / Second
720 °/s
Period per Rev
0.5 s
Engineering Context: At 12.566 rad/s (moderate machinery speed (120 RPM)), At 12.5664 rad/s, the rotor spins at 120 RPM (2.00 Hz), commonly encountered in gearboxes and machine tool spindles.

Forward Conversion: 120 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 120 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

12.5664 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

12.5664 rad/s = 376.992/π RPM ≈ 120.000281 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 120.0091 RPM instead of the exact 120.0003 RPM — an error of 0.008839 RPM.

What this speed looks like in practice

At 120.0003 RPM a shaft turns about 2.67× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.67× faster.

Revolutions over time

That is 7,200 revolutions per hour and 172,800 per day. A quarter turn (90°) takes 125 ms, and the shaft sweeps 0.72° every millisecond.

Rim speed and centripetal load at ω = 12.5664 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.1257 m/s · 0.4524 km/h1.579 m/s² · 0.161 g
5 cm10 cm0.6283 m/s · 2.262 km/h7.896 m/s² · 0.8051 g
10 cm20 cm1.257 m/s · 4.524 km/h15.79 m/s² · 1.61 g
25 cm50 cm3.142 m/s · 11.31 km/h39.48 m/s² · 4.026 g
50 cm1 m6.283 m/s · 22.62 km/h78.96 m/s² · 8.051 g
1 m2 m12.57 m/s · 45.24 km/h157.9 m/s² · 16.1 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 120 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
22 HzBelow typical VFD range — use a gearbox
44 HzBelow typical VFD range — use a gearbox
66 HzReachable with a VFD
88 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:140 RPM · 4.189 rad/s×3
5:124 RPM · 2.513 rad/s×5
10:112 RPM · 1.257 rad/s×10
30:14 RPM · 0.4189 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.07896 J
0.01 kg·m² (bench-grinder wheel)0.7896 J
0.1 kg·m² (car flywheel)7.896 J
1 kg·m² (industrial flywheel)78.96 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions