9 Rad/s to RPM Converter
Instant conversion for 9 rad/s to RPM (85.9437 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 85.943669
- Degrees per Second (°/s)
- 515.66202 °/s
- Hertz (Hz)
- 1.432395 Hz
- Revolutions per Second (RPS)
- 1.432395 rev/s
- Revolutions per Hour (RPH)
- 5,156.6202 rev/hr
- Revolutions per Day
- 123,758.88 rev/day
- Radians per Minute (rad/min)
- 540 rad/min
- Milliradians per Second (mrad/s)
- 9,000 mrad/s
- Period (seconds per rev)
- 0.698132 s/rev
- Exact Formula
- 9 × 30/π = 85.943669 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 9 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 9 × (30 / π) = 85.9437 RPM
Exact fraction: (9 × 30)/π RPM · Reciprocal: 85.944 RPM × (π/30) = 9 rad/s
Forward Conversion: 86 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
9 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
9 rad/s = 270/π RPM ≈ 85.943669 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 85.95 RPM instead of the exact 85.9437 RPM — an error of 0.006331 RPM.
What this speed looks like in practice
At 85.9437 RPM a shaft turns about 1.91× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.33× faster.
Revolutions over time
That is 5,156.6 revolutions per hour and 123,760 per day. A quarter turn (90°) takes 175 ms, and the shaft sweeps 0.5157° every millisecond.
Rim speed and centripetal load at ω = 9 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.09 m/s · 0.324 km/h | 0.81 m/s² · 0.0826 g |
| 5 cm | 10 cm | 0.45 m/s · 1.62 km/h | 4.05 m/s² · 0.413 g |
| 10 cm | 20 cm | 0.9 m/s · 3.24 km/h | 8.1 m/s² · 0.826 g |
| 25 cm | 50 cm | 2.25 m/s · 8.1 km/h | 20.25 m/s² · 2.065 g |
| 50 cm | 1 m | 4.5 m/s · 16.2 km/h | 40.5 m/s² · 4.13 g |
| 1 m | 2 m | 9 m/s · 32.4 km/h | 81 m/s² · 8.26 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 85.94 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.432 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.865 Hz | Below typical VFD range — use a gearbox |
| 6 | 4.297 Hz | Below typical VFD range — use a gearbox |
| 8 | 5.73 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 28.65 RPM · 3 rad/s | ×3 |
| 5:1 | 17.19 RPM · 1.8 rad/s | ×5 |
| 10:1 | 8.594 RPM · 0.9 rad/s | ×10 |
| 30:1 | 2.865 RPM · 0.3 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.0405 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.405 J |
| 0.1 kg·m² (car flywheel) | 4.05 J |
| 1 kg·m² (industrial flywheel) | 40.5 J |
Multiples of this speed
- 0.5× = 4.5 rad/s42.9718 RPM
- 2× = 18 rad/s171.8873 RPM
- 5× = 45 rad/s429.7183 RPM
- 10× = 90 rad/s859.4367 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 9 radians per second to RPM, multiply 9 by 30 and divide by π: 9 × (30 / π) = 85.9437 RPM (approx. 85.944 RPM).
9 rad/s equals 1.4324 Hz (revolutions per second), calculated by dividing 9 by 2π (approx. 6.283185).
To convert 85.944 RPM back to radians per second, multiply by π and divide by 30: 85.944 × (π / 30) ≈ 9 rad/s.
At 9 rad/s, one full 360° revolution takes 0.6981 seconds (698.13 ms).
9 rad/s is 85.9437 RPM, which a 4-pole induction motor reaches synchronously at 2.8648 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 9 rad/s × 0.1 m = 0.9 m/s (3.24 km/h), with a centripetal acceleration of ω²·r = 8.1 m/s².