49 RPM to Radians Per Second Converter
Instant conversion for 49 RPM to rad/s (5.131268 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 5.131268
- Degrees per Second (°/s)
- 294 °/s
- Hertz (Hz)
- 0.816667 Hz
- Revolutions per Second (RPS)
- 0.816667 rev/s
- Revolutions per Hour (RPH)
- 2,940 rev/hr
- Revolutions per Day
- 70,560 rev/day
- Radians per Minute (rad/min)
- 307.87608 rad/min
- Milliradians per Second (mrad/s)
- 5,131.268 mrad/s
- Period (seconds per rev)
- 1.22449 s/rev
- Exact Formula
- 49 × π/30 = 5.131268 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 49 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 49 × (π / 30) = 5.131268 rad/s
Exact fraction: 49π/30 rad/s · Reciprocal: 5.131 rad/s × (30/π) = 49 RPM
Reverse Conversion: 5.131 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
49 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
49 RPM = 49π/30 rad/s ≈ 5.131268 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 5.1303 rad/s instead of the exact 5.1313 rad/s — an error of 0.000968 rad/s.
What this speed looks like in practice
At 49 RPM a shaft turns about 1.09× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 4.08× faster.
Revolutions over time
That is 2,940 revolutions per hour and 70,560 per day. A quarter turn (90°) takes 306 ms, and the shaft sweeps 0.294° every millisecond.
Rim speed and centripetal load at ω = 5.1313 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.05131 m/s · 0.1847 km/h | 0.2633 m/s² · 0.02685 g |
| 5 cm | 10 cm | 0.2566 m/s · 0.9236 km/h | 1.316 m/s² · 0.1342 g |
| 10 cm | 20 cm | 0.5131 m/s · 1.847 km/h | 2.633 m/s² · 0.2685 g |
| 25 cm | 50 cm | 1.283 m/s · 4.618 km/h | 6.582 m/s² · 0.6712 g |
| 50 cm | 1 m | 2.566 m/s · 9.236 km/h | 13.16 m/s² · 1.342 g |
| 1 m | 2 m | 5.131 m/s · 18.47 km/h | 26.33 m/s² · 2.685 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 49 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.8167 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.633 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.45 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.267 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 16.33 RPM · 1.71 rad/s | ×3 |
| 5:1 | 9.8 RPM · 1.026 rad/s | ×5 |
| 10:1 | 4.9 RPM · 0.5131 rad/s | ×10 |
| 30:1 | 1.633 RPM · 0.171 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01316 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1316 J |
| 0.1 kg·m² (car flywheel) | 1.316 J |
| 1 kg·m² (industrial flywheel) | 13.16 J |
Multiples of this speed
- 0.5× = 24.5 RPM2.5656 rad/s
- 2× = 98 RPM10.2625 rad/s
- 5× = 245 RPM25.6563 rad/s
- 10× = 490 RPM51.3127 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 49 RPM to radians per second, multiply 49 by π and divide by 30: 49 × (π / 30) = 5.131268 rad/s (approx. 5.131 rad/s).
49 RPM equals 0.8167 Hz (revolutions per second), calculated by dividing 49 by 60 seconds.
To convert 5.131 rad/s back to RPM, multiply by 30 and divide by π: 5.131 × (30 / π) ≈ 49 RPM.
At 49 RPM, one full 360° revolution takes 1.2245 seconds (1224.49 ms).
A 4-pole induction motor has a synchronous speed of 49 RPM at 1.6333 Hz (f = RPM × poles / 120 = 49 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 5.131268 rad/s × 0.1 m = 0.5131 m/s (1.8473 km/h). The centripetal acceleration at the rim is ω²·r = 2.633 m/s².