48 RPM to Radians Per Second Converter
Instant conversion for 48 RPM to rad/s (5.026548 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 5.0265482
- Degrees per Second (°/s)
- 288 °/s
- Hertz (Hz)
- 0.8 Hz
- Revolutions per Second (RPS)
- 0.8 rev/s
- Revolutions per Hour (RPH)
- 2,880 rev/hr
- Revolutions per Day
- 69,120 rev/day
- Radians per Minute (rad/min)
- 301.59289 rad/min
- Milliradians per Second (mrad/s)
- 5,026.5482 mrad/s
- Period (seconds per rev)
- 1.25 s/rev
- Exact Formula
- 48 × π/30 = 5.0265482 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 48 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 48 × (π / 30) = 5.026548 rad/s
Exact fraction: 48π/30 rad/s · Reciprocal: 5.027 rad/s × (30/π) = 48 RPM
Reverse Conversion: 5.027 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
48 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
48 RPM = 8π/5 rad/s ≈ 5.026548 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 5.0256 rad/s instead of the exact 5.0265 rad/s — an error of 0.0009482 rad/s.
What this speed looks like in practice
At 48 RPM a shaft turns about 1.07× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 4.17× faster.
Revolutions over time
That is 2,880 revolutions per hour and 69,120 per day. A quarter turn (90°) takes 313 ms, and the shaft sweeps 0.288° every millisecond.
Rim speed and centripetal load at ω = 5.0265 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.05027 m/s · 0.181 km/h | 0.2527 m/s² · 0.02576 g |
| 5 cm | 10 cm | 0.2513 m/s · 0.9048 km/h | 1.263 m/s² · 0.1288 g |
| 10 cm | 20 cm | 0.5027 m/s · 1.81 km/h | 2.527 m/s² · 0.2576 g |
| 25 cm | 50 cm | 1.257 m/s · 4.524 km/h | 6.317 m/s² · 0.6441 g |
| 50 cm | 1 m | 2.513 m/s · 9.048 km/h | 12.63 m/s² · 1.288 g |
| 1 m | 2 m | 5.027 m/s · 18.1 km/h | 25.27 m/s² · 2.576 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 48 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.8 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.6 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.4 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.2 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 16 RPM · 1.676 rad/s | ×3 |
| 5:1 | 9.6 RPM · 1.005 rad/s | ×5 |
| 10:1 | 4.8 RPM · 0.5027 rad/s | ×10 |
| 30:1 | 1.6 RPM · 0.1676 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01263 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1263 J |
| 0.1 kg·m² (car flywheel) | 1.263 J |
| 1 kg·m² (industrial flywheel) | 12.63 J |
Multiples of this speed
- 0.5× = 24 RPM2.5133 rad/s
- 2× = 96 RPM10.0531 rad/s
- 5× = 240 RPM25.1327 rad/s
- 10× = 480 RPM50.2655 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 48 RPM to radians per second, multiply 48 by π and divide by 30: 48 × (π / 30) = 5.026548 rad/s (approx. 5.027 rad/s).
48 RPM equals 0.8000 Hz (revolutions per second), calculated by dividing 48 by 60 seconds.
To convert 5.027 rad/s back to RPM, multiply by 30 and divide by π: 5.027 × (30 / π) ≈ 48 RPM.
At 48 RPM, one full 360° revolution takes 1.25 seconds (1250.00 ms).
A 4-pole induction motor has a synchronous speed of 48 RPM at 1.6 Hz (f = RPM × poles / 120 = 48 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 5.026548 rad/s × 0.1 m = 0.5027 m/s (1.8096 km/h). The centripetal acceleration at the rim is ω²·r = 2.5266 m/s².