98 RPM to Radians Per Second Converter
Instant conversion for 98 RPM to rad/s (10.262536 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 10.262536
- Degrees per Second (°/s)
- 588 °/s
- Hertz (Hz)
- 1.633333 Hz
- Revolutions per Second (RPS)
- 1.633333 rev/s
- Revolutions per Hour (RPH)
- 5,880 rev/hr
- Revolutions per Day
- 141,120 rev/day
- Radians per Minute (rad/min)
- 615.75216 rad/min
- Milliradians per Second (mrad/s)
- 10,262.536 mrad/s
- Period (seconds per rev)
- 0.612245 s/rev
- Exact Formula
- 98 × π/30 = 10.262536 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 98 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 98 × (π / 30) = 10.262536 rad/s
Exact fraction: 98π/30 rad/s · Reciprocal: 10.263 rad/s × (30/π) = 98 RPM
Reverse Conversion: 10.263 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
98 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
98 RPM = 49π/15 rad/s ≈ 10.262536 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 10.2606 rad/s instead of the exact 10.2625 rad/s — an error of 0.001936 rad/s.
What this speed looks like in practice
At 98 RPM a shaft turns about 2.18× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.04× faster.
Revolutions over time
That is 5,880 revolutions per hour and 141,120 per day. A quarter turn (90°) takes 153 ms, and the shaft sweeps 0.588° every millisecond.
Rim speed and centripetal load at ω = 10.2625 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1026 m/s · 0.3695 km/h | 1.053 m/s² · 0.1074 g |
| 5 cm | 10 cm | 0.5131 m/s · 1.847 km/h | 5.266 m/s² · 0.537 g |
| 10 cm | 20 cm | 1.026 m/s · 3.695 km/h | 10.53 m/s² · 1.074 g |
| 25 cm | 50 cm | 2.566 m/s · 9.236 km/h | 26.33 m/s² · 2.685 g |
| 50 cm | 1 m | 5.131 m/s · 18.47 km/h | 52.66 m/s² · 5.37 g |
| 1 m | 2 m | 10.26 m/s · 36.95 km/h | 105.3 m/s² · 10.74 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 98 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.633 Hz | Below typical VFD range — use a gearbox |
| 4 | 3.267 Hz | Below typical VFD range — use a gearbox |
| 6 | 4.9 Hz | Below typical VFD range — use a gearbox |
| 8 | 6.533 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 32.67 RPM · 3.421 rad/s | ×3 |
| 5:1 | 19.6 RPM · 2.053 rad/s | ×5 |
| 10:1 | 9.8 RPM · 1.026 rad/s | ×10 |
| 30:1 | 3.267 RPM · 0.3421 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.05266 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.5266 J |
| 0.1 kg·m² (car flywheel) | 5.266 J |
| 1 kg·m² (industrial flywheel) | 52.66 J |
Multiples of this speed
- 0.5× = 49 RPM5.1313 rad/s
- 2× = 196 RPM20.5251 rad/s
- 5× = 490 RPM51.3127 rad/s
- 10× = 980 RPM102.6254 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 98 RPM to radians per second, multiply 98 by π and divide by 30: 98 × (π / 30) = 10.262536 rad/s (approx. 10.263 rad/s).
98 RPM equals 1.6333 Hz (revolutions per second), calculated by dividing 98 by 60 seconds.
To convert 10.263 rad/s back to RPM, multiply by 30 and divide by π: 10.263 × (30 / π) ≈ 98 RPM.
At 98 RPM, one full 360° revolution takes 0.6122 seconds (612.24 ms).
A 4-pole induction motor has a synchronous speed of 98 RPM at 3.2667 Hz (f = RPM × poles / 120 = 98 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 10.262536 rad/s × 0.1 m = 1.0263 m/s (3.6945 km/h). The centripetal acceleration at the rim is ω²·r = 10.532 m/s².