47 RPM to Radians Per Second Converter
Instant conversion for 47 RPM to rad/s (4.921828 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 4.9218285
- Degrees per Second (°/s)
- 282 °/s
- Hertz (Hz)
- 0.783333 Hz
- Revolutions per Second (RPS)
- 0.783333 rev/s
- Revolutions per Hour (RPH)
- 2,820 rev/hr
- Revolutions per Day
- 67,680 rev/day
- Radians per Minute (rad/min)
- 295.30971 rad/min
- Milliradians per Second (mrad/s)
- 4,921.8285 mrad/s
- Period (seconds per rev)
- 1.276596 s/rev
- Exact Formula
- 47 × π/30 = 4.9218285 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 47 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 47 × (π / 30) = 4.921828 rad/s
Exact fraction: 47π/30 rad/s · Reciprocal: 4.922 rad/s × (30/π) = 47 RPM
Reverse Conversion: 4.922 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
47 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
47 RPM = 47π/30 rad/s ≈ 4.921828 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 4.9209 rad/s instead of the exact 4.9218 rad/s — an error of 0.0009285 rad/s.
What this speed looks like in practice
At 47 RPM a shaft turns about 1.04× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 4.26× faster.
Revolutions over time
That is 2,820 revolutions per hour and 67,680 per day. A quarter turn (90°) takes 319 ms, and the shaft sweeps 0.282° every millisecond.
Rim speed and centripetal load at ω = 4.9218 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.04922 m/s · 0.1772 km/h | 0.2422 m/s² · 0.0247 g |
| 5 cm | 10 cm | 0.2461 m/s · 0.8859 km/h | 1.211 m/s² · 0.1235 g |
| 10 cm | 20 cm | 0.4922 m/s · 1.772 km/h | 2.422 m/s² · 0.247 g |
| 25 cm | 50 cm | 1.23 m/s · 4.43 km/h | 6.056 m/s² · 0.6176 g |
| 50 cm | 1 m | 2.461 m/s · 8.859 km/h | 12.11 m/s² · 1.235 g |
| 1 m | 2 m | 4.922 m/s · 17.72 km/h | 24.22 m/s² · 2.47 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 47 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.7833 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.567 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.35 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.133 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 15.67 RPM · 1.641 rad/s | ×3 |
| 5:1 | 9.4 RPM · 0.9844 rad/s | ×5 |
| 10:1 | 4.7 RPM · 0.4922 rad/s | ×10 |
| 30:1 | 1.567 RPM · 0.1641 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01211 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1211 J |
| 0.1 kg·m² (car flywheel) | 1.211 J |
| 1 kg·m² (industrial flywheel) | 12.11 J |
Multiples of this speed
- 0.5× = 23.5 RPM2.4609 rad/s
- 2× = 94 RPM9.8437 rad/s
- 5× = 235 RPM24.6091 rad/s
- 10× = 470 RPM49.2183 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 47 RPM to radians per second, multiply 47 by π and divide by 30: 47 × (π / 30) = 4.921828 rad/s (approx. 4.922 rad/s).
47 RPM equals 0.7833 Hz (revolutions per second), calculated by dividing 47 by 60 seconds.
To convert 4.922 rad/s back to RPM, multiply by 30 and divide by π: 4.922 × (30 / π) ≈ 47 RPM.
At 47 RPM, one full 360° revolution takes 1.2766 seconds (1276.60 ms).
A 4-pole induction motor has a synchronous speed of 47 RPM at 1.5667 Hz (f = RPM × poles / 120 = 47 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 4.921828 rad/s × 0.1 m = 0.4922 m/s (1.7719 km/h). The centripetal acceleration at the rim is ω²·r = 2.4224 m/s².