RPM to Radians Per SecondRPM to rad/s

3,400 RPM to Radians Per Second Converter

Instant conversion for 3,400 RPM to rad/s (356.047167 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result356.047167 rad/s
Radians per Second (rad/s)
356.04717
Degrees per Second (°/s)
20,400 °/s
Hertz (Hz)
56.666667 Hz
Revolutions per Second (RPS)
56.666667 rev/s
Revolutions per Hour (RPH)
204,000 rev/hr
Revolutions per Day
4,896,000 rev/day
Radians per Minute (rad/min)
21,362.83 rad/min
Milliradians per Second (mrad/s)
356,047.17 mrad/s
Period (seconds per rev)
0.017647 s/rev
Exact Formula
3400 × π/30 = 356.04717 rad/s
Nearest Real-World Example
Car engine — highway (2,500 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):356.047167 rad/s
Rounded (0.10472):356.048000 rad/s
Angular Error / Hour:171.73° / hr

Worked Conversion: 3,400 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 3400 × (π / 30) = 356.047167 rad/s

Exact fraction: 3400π/30 rad/s · Reciprocal: 356.05 rad/s × (30/π) = 3,400 RPM

Angular Velocity
356.047167 rad/s
Frequency
56.6667 Hz
Degrees / Second
20,400 °/s
Period per Rev
0.0176 s
Engineering Context: Several thousand RPM is power-tool and high-revving-engine territory, where balance and bearing life become the binding constraints.

Reverse Conversion: 356.05 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

3,400 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

3,400 RPM = 340π/3 rad/s ≈ 356.047167 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 355.98 rad/s instead of the exact 356.0472 rad/s — an error of 0.06717 rad/s.

What this speed looks like in practice

At 3,400 RPM a shaft turns about 1.89× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.59× faster.

Revolutions over time

That is 204,000 revolutions per hour and 4,896,000 per day. A quarter turn (90°) takes 4.41 ms, and the shaft sweeps 20.4° every millisecond.

Rim speed and centripetal load at ω = 356.0472 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm3.56 m/s · 12.82 km/h1,268 m/s² · 129.3 g
5 cm10 cm17.8 m/s · 64.09 km/h6,338 m/s² · 646.3 g
10 cm20 cm35.6 m/s · 128.2 km/h12,680 m/s² · 1,293 g
25 cm50 cm89.01 m/s · 320.4 km/h31,690 m/s² · 3,232 g
50 cm1 m178 m/s · 640.9 km/h63,380 m/s² · 6,463 g
1 m2 m356 m/s · 1,282 km/h126,800 m/s² · 12,930 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 3,400 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
256.67 HzReachable with a VFD
4113.3 HzReachable with a VFD
6170 HzAbove typical VFD range
8226.7 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:11,133 RPM · 118.7 rad/s×3
5:1680 RPM · 71.21 rad/s×5
10:1340 RPM · 35.6 rad/s×10
30:1113.3 RPM · 11.87 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)63.38 J
0.01 kg·m² (bench-grinder wheel)633.8 J
0.1 kg·m² (car flywheel)6.338 kJ
1 kg·m² (industrial flywheel)63.38 kJ

Multiples of this speed

  • 0.5× = 1,700 RPM178.0236 rad/s
  • 2× = 6,800 RPM712.0943 rad/s
  • 5× = 17,000 RPM1,780.2358 rad/s
  • 10× = 34,000 RPM3,560.4717 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions