RPM to Radians Per SecondRPM to rad/s

11,000 RPM to Radians Per Second Converter

Instant conversion for 11,000 RPM to rad/s (1151.917306 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result1151.917306 rad/s
Radians per Second (rad/s)
1151.9173
Degrees per Second (°/s)
66,000 °/s
Hertz (Hz)
183.33333 Hz
Revolutions per Second (RPS)
183.33333 rev/s
Revolutions per Hour (RPH)
660,000 rev/hr
Revolutions per Day
15,840,000 rev/day
Radians per Minute (rad/min)
69,115.038 rad/min
Milliradians per Second (mrad/s)
1,151,917.3 mrad/s
Period (seconds per rev)
0.005455 s/rev
Exact Formula
11000 × π/30 = 1151.9173 rad/s
Nearest Real-World Example
Angle grinder (11,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):1,151.917306 rad/s
Rounded (0.10472):1,151.920000 rad/s
Angular Error / Hour:555.61° / hr

Worked Conversion: 11,000 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 11000 × (π / 30) = 1151.917306 rad/s

Exact fraction: 11000π/30 rad/s · Reciprocal: 1151.9 rad/s × (30/π) = 11,000 RPM

Angular Velocity
1151.917306 rad/s
Frequency
183.3333 Hz
Degrees / Second
66,000 °/s
Period per Rev
0.0055 s
Engineering Context: Around 11,000 RPM is angle-grinder territory, where disc rim speed — angular velocity times radius — is the safety-critical number rather than RPM itself.

Reverse Conversion: 1151.9 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

11,000 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

11,000 RPM = 1,100π/3 rad/s ≈ 1,151.917306 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 1,151.7 rad/s instead of the exact 1,151.9173 rad/s — an error of 0.2173 rad/s.

What this speed looks like in practice

That is the typical speed of a 115 mm angle grinder. At 11,000 RPM a shaft turns about 1.53× as fast as a desktop hard drive (7,200 RPM). A rotary multi-tool at full speed turns about 3.18× faster.

Revolutions over time

That is 660,000 revolutions per hour and 15,840,000 per day. A quarter turn (90°) takes 1.36 ms, and the shaft sweeps 66° every millisecond.

Rim speed and centripetal load at ω = 1,151.9173 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm11.52 m/s · 41.47 km/h13,270 m/s² · 1,353 g
5 cm10 cm57.6 m/s · 207.3 km/h66,350 m/s² · 6,765 g
10 cm20 cm115.2 m/s · 414.7 km/h132,700 m/s² · 13,530 g
25 cm50 cm288 m/s · 1,037 km/h331,700 m/s² · 33,830 g
50 cm1 m576 m/s · 2,073 km/h663,500 m/s² · 67,650 g
1 m2 m1,152 m/s · 4,147 km/h1,327,000 m/s² · 135,300 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 11,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
2183.3 HzAbove typical VFD range
4366.7 HzAbove typical VFD range
6550 HzAbove typical VFD range
8733.3 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:13,667 RPM · 384 rad/s×3
5:12,200 RPM · 230.4 rad/s×5
10:11,100 RPM · 115.2 rad/s×10
30:1366.7 RPM · 38.4 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)663.5 J
0.01 kg·m² (bench-grinder wheel)6.635 kJ
0.1 kg·m² (car flywheel)66.35 kJ
1 kg·m² (industrial flywheel)663.5 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions