130 RPM to Radians Per Second Converter
Instant conversion for 130 RPM to rad/s (13.613568 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 13.613568
- Degrees per Second (°/s)
- 780 °/s
- Hertz (Hz)
- 2.166667 Hz
- Revolutions per Second (RPS)
- 2.166667 rev/s
- Revolutions per Hour (RPH)
- 7,800 rev/hr
- Revolutions per Day
- 187,200 rev/day
- Radians per Minute (rad/min)
- 816.81409 rad/min
- Milliradians per Second (mrad/s)
- 13,613.568 mrad/s
- Period (seconds per rev)
- 0.461538 s/rev
- Exact Formula
- 130 × π/30 = 13.613568 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 130 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 130 × (π / 30) = 13.613568 rad/s
Exact fraction: 130π/30 rad/s · Reciprocal: 13.614 rad/s × (30/π) = 130 RPM
Reverse Conversion: 13.614 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
130 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
130 RPM = 13π/3 rad/s ≈ 13.613568 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 13.611 rad/s instead of the exact 13.6136 rad/s — an error of 0.002568 rad/s.
What this speed looks like in practice
At 130 RPM a shaft turns about 2.89× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.54× faster.
Revolutions over time
That is 7,800 revolutions per hour and 187,200 per day. A quarter turn (90°) takes 115 ms, and the shaft sweeps 0.78° every millisecond.
Rim speed and centripetal load at ω = 13.6136 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1361 m/s · 0.4901 km/h | 1.853 m/s² · 0.189 g |
| 5 cm | 10 cm | 0.6807 m/s · 2.45 km/h | 9.266 m/s² · 0.9449 g |
| 10 cm | 20 cm | 1.361 m/s · 4.901 km/h | 18.53 m/s² · 1.89 g |
| 25 cm | 50 cm | 3.403 m/s · 12.25 km/h | 46.33 m/s² · 4.725 g |
| 50 cm | 1 m | 6.807 m/s · 24.5 km/h | 92.66 m/s² · 9.449 g |
| 1 m | 2 m | 13.61 m/s · 49.01 km/h | 185.3 m/s² · 18.9 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 130 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2.167 Hz | Below typical VFD range — use a gearbox |
| 4 | 4.333 Hz | Below typical VFD range — use a gearbox |
| 6 | 6.5 Hz | Reachable with a VFD |
| 8 | 8.667 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 43.33 RPM · 4.538 rad/s | ×3 |
| 5:1 | 26 RPM · 2.723 rad/s | ×5 |
| 10:1 | 13 RPM · 1.361 rad/s | ×10 |
| 30:1 | 4.333 RPM · 0.4538 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.09266 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.9266 J |
| 0.1 kg·m² (car flywheel) | 9.266 J |
| 1 kg·m² (industrial flywheel) | 92.66 J |
Multiples of this speed
- 0.5× = 65 RPM6.8068 rad/s
- 2× = 260 RPM27.2271 rad/s
- 5× = 650 RPM68.0678 rad/s
- 10× = 1,300 RPM136.1357 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 130 RPM to radians per second, multiply 130 by π and divide by 30: 130 × (π / 30) = 13.613568 rad/s (approx. 13.614 rad/s).
130 RPM equals 2.1667 Hz (revolutions per second), calculated by dividing 130 by 60 seconds.
To convert 13.614 rad/s back to RPM, multiply by 30 and divide by π: 13.614 × (30 / π) ≈ 130 RPM.
At 130 RPM, one full 360° revolution takes 0.4615 seconds (461.54 ms).
A 4-pole induction motor has a synchronous speed of 130 RPM at 4.3333 Hz (f = RPM × poles / 120 = 130 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 13.613568 rad/s × 0.1 m = 1.3614 m/s (4.9009 km/h). The centripetal acceleration at the rim is ω²·r = 18.5329 m/s².