110 RPM to Radians Per Second Converter
Instant conversion for 110 RPM to rad/s (11.519173 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 11.519173
- Degrees per Second (°/s)
- 660 °/s
- Hertz (Hz)
- 1.833333 Hz
- Revolutions per Second (RPS)
- 1.833333 rev/s
- Revolutions per Hour (RPH)
- 6,600 rev/hr
- Revolutions per Day
- 158,400 rev/day
- Radians per Minute (rad/min)
- 691.15038 rad/min
- Milliradians per Second (mrad/s)
- 11,519.173 mrad/s
- Period (seconds per rev)
- 0.545455 s/rev
- Exact Formula
- 110 × π/30 = 11.519173 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 110 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 110 × (π / 30) = 11.519173 rad/s
Exact fraction: 110π/30 rad/s · Reciprocal: 11.519 rad/s × (30/π) = 110 RPM
Reverse Conversion: 11.519 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
110 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
110 RPM = 11π/3 rad/s ≈ 11.519173 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 11.517 rad/s instead of the exact 11.5192 rad/s — an error of 0.002173 rad/s.
What this speed looks like in practice
At 110 RPM a shaft turns about 2.44× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.82× faster.
Revolutions over time
That is 6,600 revolutions per hour and 158,400 per day. A quarter turn (90°) takes 136 ms, and the shaft sweeps 0.66° every millisecond.
Rim speed and centripetal load at ω = 11.5192 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1152 m/s · 0.4147 km/h | 1.327 m/s² · 0.1353 g |
| 5 cm | 10 cm | 0.576 m/s · 2.073 km/h | 6.635 m/s² · 0.6765 g |
| 10 cm | 20 cm | 1.152 m/s · 4.147 km/h | 13.27 m/s² · 1.353 g |
| 25 cm | 50 cm | 2.88 m/s · 10.37 km/h | 33.17 m/s² · 3.383 g |
| 50 cm | 1 m | 5.76 m/s · 20.73 km/h | 66.35 m/s² · 6.765 g |
| 1 m | 2 m | 11.52 m/s · 41.47 km/h | 132.7 m/s² · 13.53 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 110 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.833 Hz | Below typical VFD range — use a gearbox |
| 4 | 3.667 Hz | Below typical VFD range — use a gearbox |
| 6 | 5.5 Hz | Reachable with a VFD |
| 8 | 7.333 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 36.67 RPM · 3.84 rad/s | ×3 |
| 5:1 | 22 RPM · 2.304 rad/s | ×5 |
| 10:1 | 11 RPM · 1.152 rad/s | ×10 |
| 30:1 | 3.667 RPM · 0.384 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.06635 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.6635 J |
| 0.1 kg·m² (car flywheel) | 6.635 J |
| 1 kg·m² (industrial flywheel) | 66.35 J |
Multiples of this speed
- 0.5× = 55 RPM5.7596 rad/s
- 2× = 220 RPM23.0383 rad/s
- 5× = 550 RPM57.5959 rad/s
- 10× = 1,100 RPM115.1917 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 110 RPM to radians per second, multiply 110 by π and divide by 30: 110 × (π / 30) = 11.519173 rad/s (approx. 11.519 rad/s).
110 RPM equals 1.8333 Hz (revolutions per second), calculated by dividing 110 by 60 seconds.
To convert 11.519 rad/s back to RPM, multiply by 30 and divide by π: 11.519 × (30 / π) ≈ 110 RPM.
At 110 RPM, one full 360° revolution takes 0.5455 seconds (545.45 ms).
A 4-pole induction motor has a synchronous speed of 110 RPM at 3.6667 Hz (f = RPM × poles / 120 = 110 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 11.519173 rad/s × 0.1 m = 1.1519 m/s (4.1469 km/h). The centripetal acceleration at the rim is ω²·r = 13.2691 m/s².