55 RPM to Radians Per Second Converter
Instant conversion for 55 RPM to rad/s (5.759587 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 5.7595865
- Degrees per Second (°/s)
- 330 °/s
- Hertz (Hz)
- 0.916667 Hz
- Revolutions per Second (RPS)
- 0.916667 rev/s
- Revolutions per Hour (RPH)
- 3,300 rev/hr
- Revolutions per Day
- 79,200 rev/day
- Radians per Minute (rad/min)
- 345.57519 rad/min
- Milliradians per Second (mrad/s)
- 5,759.5865 mrad/s
- Period (seconds per rev)
- 1.090909 s/rev
- Exact Formula
- 55 × π/30 = 5.7595865 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 55 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 55 × (π / 30) = 5.759587 rad/s
Exact fraction: 55π/30 rad/s · Reciprocal: 5.76 rad/s × (30/π) = 55 RPM
Reverse Conversion: 5.76 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
55 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
55 RPM = 11π/6 rad/s ≈ 5.759587 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 5.7585 rad/s instead of the exact 5.7596 rad/s — an error of 0.001087 rad/s.
What this speed looks like in practice
At 55 RPM a shaft turns about 1.22× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.64× faster.
Revolutions over time
That is 3,300 revolutions per hour and 79,200 per day. A quarter turn (90°) takes 273 ms, and the shaft sweeps 0.33° every millisecond.
Rim speed and centripetal load at ω = 5.7596 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.0576 m/s · 0.2073 km/h | 0.3317 m/s² · 0.03383 g |
| 5 cm | 10 cm | 0.288 m/s · 1.037 km/h | 1.659 m/s² · 0.1691 g |
| 10 cm | 20 cm | 0.576 m/s · 2.073 km/h | 3.317 m/s² · 0.3383 g |
| 25 cm | 50 cm | 1.44 m/s · 5.184 km/h | 8.293 m/s² · 0.8457 g |
| 50 cm | 1 m | 2.88 m/s · 10.37 km/h | 16.59 m/s² · 1.691 g |
| 1 m | 2 m | 5.76 m/s · 20.73 km/h | 33.17 m/s² · 3.383 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 55 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.9167 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.833 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.75 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.667 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 18.33 RPM · 1.92 rad/s | ×3 |
| 5:1 | 11 RPM · 1.152 rad/s | ×5 |
| 10:1 | 5.5 RPM · 0.576 rad/s | ×10 |
| 30:1 | 1.833 RPM · 0.192 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01659 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1659 J |
| 0.1 kg·m² (car flywheel) | 1.659 J |
| 1 kg·m² (industrial flywheel) | 16.59 J |
Multiples of this speed
- 0.5× = 27.5 RPM2.8798 rad/s
- 2× = 110 RPM11.5192 rad/s
- 5× = 275 RPM28.7979 rad/s
- 10× = 550 RPM57.5959 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 55 RPM to radians per second, multiply 55 by π and divide by 30: 55 × (π / 30) = 5.759587 rad/s (approx. 5.76 rad/s).
55 RPM equals 0.9167 Hz (revolutions per second), calculated by dividing 55 by 60 seconds.
To convert 5.76 rad/s back to RPM, multiply by 30 and divide by π: 5.76 × (30 / π) ≈ 55 RPM.
At 55 RPM, one full 360° revolution takes 1.0909 seconds (1090.91 ms).
A 4-pole induction motor has a synchronous speed of 55 RPM at 1.8333 Hz (f = RPM × poles / 120 = 55 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 5.759587 rad/s × 0.1 m = 0.576 m/s (2.0735 km/h). The centripetal acceleration at the rim is ω²·r = 3.3173 m/s².