97 RPM to Radians Per Second Converter
Instant conversion for 97 RPM to rad/s (10.157816 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 10.157816
- Degrees per Second (°/s)
- 582 °/s
- Hertz (Hz)
- 1.616667 Hz
- Revolutions per Second (RPS)
- 1.616667 rev/s
- Revolutions per Hour (RPH)
- 5,820 rev/hr
- Revolutions per Day
- 139,680 rev/day
- Radians per Minute (rad/min)
- 609.46897 rad/min
- Milliradians per Second (mrad/s)
- 10,157.816 mrad/s
- Period (seconds per rev)
- 0.618557 s/rev
- Exact Formula
- 97 × π/30 = 10.157816 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 97 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 97 × (π / 30) = 10.157816 rad/s
Exact fraction: 97π/30 rad/s · Reciprocal: 10.158 rad/s × (30/π) = 97 RPM
Reverse Conversion: 10.158 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
97 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
97 RPM = 97π/30 rad/s ≈ 10.157816 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 10.1559 rad/s instead of the exact 10.1578 rad/s — an error of 0.001916 rad/s.
What this speed looks like in practice
At 97 RPM a shaft turns about 2.16× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.06× faster.
Revolutions over time
That is 5,820 revolutions per hour and 139,680 per day. A quarter turn (90°) takes 155 ms, and the shaft sweeps 0.582° every millisecond.
Rim speed and centripetal load at ω = 10.1578 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1016 m/s · 0.3657 km/h | 1.032 m/s² · 0.1052 g |
| 5 cm | 10 cm | 0.5079 m/s · 1.828 km/h | 5.159 m/s² · 0.5261 g |
| 10 cm | 20 cm | 1.016 m/s · 3.657 km/h | 10.32 m/s² · 1.052 g |
| 25 cm | 50 cm | 2.539 m/s · 9.142 km/h | 25.8 m/s² · 2.63 g |
| 50 cm | 1 m | 5.079 m/s · 18.28 km/h | 51.59 m/s² · 5.261 g |
| 1 m | 2 m | 10.16 m/s · 36.57 km/h | 103.2 m/s² · 10.52 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 97 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.617 Hz | Below typical VFD range — use a gearbox |
| 4 | 3.233 Hz | Below typical VFD range — use a gearbox |
| 6 | 4.85 Hz | Below typical VFD range — use a gearbox |
| 8 | 6.467 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 32.33 RPM · 3.386 rad/s | ×3 |
| 5:1 | 19.4 RPM · 2.032 rad/s | ×5 |
| 10:1 | 9.7 RPM · 1.016 rad/s | ×10 |
| 30:1 | 3.233 RPM · 0.3386 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.05159 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.5159 J |
| 0.1 kg·m² (car flywheel) | 5.159 J |
| 1 kg·m² (industrial flywheel) | 51.59 J |
Multiples of this speed
- 0.5× = 48.5 RPM5.0789 rad/s
- 2× = 194 RPM20.3156 rad/s
- 5× = 485 RPM50.7891 rad/s
- 10× = 970 RPM101.5782 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 97 RPM to radians per second, multiply 97 by π and divide by 30: 97 × (π / 30) = 10.157816 rad/s (approx. 10.158 rad/s).
97 RPM equals 1.6167 Hz (revolutions per second), calculated by dividing 97 by 60 seconds.
To convert 10.158 rad/s back to RPM, multiply by 30 and divide by π: 10.158 × (30 / π) ≈ 97 RPM.
At 97 RPM, one full 360° revolution takes 0.6186 seconds (618.56 ms).
A 4-pole induction motor has a synchronous speed of 97 RPM at 3.2333 Hz (f = RPM × poles / 120 = 97 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 10.157816 rad/s × 0.1 m = 1.0158 m/s (3.6568 km/h). The centripetal acceleration at the rim is ω²·r = 10.3181 m/s².