74 RPM to Radians Per Second Converter
Instant conversion for 74 RPM to rad/s (7.749262 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 7.7492619
- Degrees per Second (°/s)
- 444 °/s
- Hertz (Hz)
- 1.233333 Hz
- Revolutions per Second (RPS)
- 1.233333 rev/s
- Revolutions per Hour (RPH)
- 4,440 rev/hr
- Revolutions per Day
- 106,560 rev/day
- Radians per Minute (rad/min)
- 464.95571 rad/min
- Milliradians per Second (mrad/s)
- 7,749.2619 mrad/s
- Period (seconds per rev)
- 0.810811 s/rev
- Exact Formula
- 74 × π/30 = 7.7492619 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 74 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 74 × (π / 30) = 7.749262 rad/s
Exact fraction: 74π/30 rad/s · Reciprocal: 7.749 rad/s × (30/π) = 74 RPM
Reverse Conversion: 7.749 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
74 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
74 RPM = 37π/15 rad/s ≈ 7.749262 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 7.7478 rad/s instead of the exact 7.7493 rad/s — an error of 0.001462 rad/s.
What this speed looks like in practice
At 74 RPM a shaft turns about 1.64× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.7× faster.
Revolutions over time
That is 4,440 revolutions per hour and 106,560 per day. A quarter turn (90°) takes 203 ms, and the shaft sweeps 0.444° every millisecond.
Rim speed and centripetal load at ω = 7.7493 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.07749 m/s · 0.279 km/h | 0.6005 m/s² · 0.06124 g |
| 5 cm | 10 cm | 0.3875 m/s · 1.395 km/h | 3.003 m/s² · 0.3062 g |
| 10 cm | 20 cm | 0.7749 m/s · 2.79 km/h | 6.005 m/s² · 0.6124 g |
| 25 cm | 50 cm | 1.937 m/s · 6.974 km/h | 15.01 m/s² · 1.531 g |
| 50 cm | 1 m | 3.875 m/s · 13.95 km/h | 30.03 m/s² · 3.062 g |
| 1 m | 2 m | 7.749 m/s · 27.9 km/h | 60.05 m/s² · 6.124 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 74 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.233 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.467 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.7 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.933 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 24.67 RPM · 2.583 rad/s | ×3 |
| 5:1 | 14.8 RPM · 1.55 rad/s | ×5 |
| 10:1 | 7.4 RPM · 0.7749 rad/s | ×10 |
| 30:1 | 2.467 RPM · 0.2583 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.03003 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.3003 J |
| 0.1 kg·m² (car flywheel) | 3.003 J |
| 1 kg·m² (industrial flywheel) | 30.03 J |
Multiples of this speed
- 0.5× = 37 RPM3.8746 rad/s
- 2× = 148 RPM15.4985 rad/s
- 5× = 370 RPM38.7463 rad/s
- 10× = 740 RPM77.4926 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 74 RPM to radians per second, multiply 74 by π and divide by 30: 74 × (π / 30) = 7.749262 rad/s (approx. 7.749 rad/s).
74 RPM equals 1.2333 Hz (revolutions per second), calculated by dividing 74 by 60 seconds.
To convert 7.749 rad/s back to RPM, multiply by 30 and divide by π: 7.749 × (30 / π) ≈ 74 RPM.
At 74 RPM, one full 360° revolution takes 0.8108 seconds (810.81 ms).
A 4-pole induction motor has a synchronous speed of 74 RPM at 2.4667 Hz (f = RPM × poles / 120 = 74 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 7.749262 rad/s × 0.1 m = 0.7749 m/s (2.7897 km/h). The centripetal acceleration at the rim is ω²·r = 6.0051 m/s².