37 RPM to Radians Per Second Converter
Instant conversion for 37 RPM to rad/s (3.874631 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 3.8746309
- Degrees per Second (°/s)
- 222 °/s
- Hertz (Hz)
- 0.616667 Hz
- Revolutions per Second (RPS)
- 0.616667 rev/s
- Revolutions per Hour (RPH)
- 2,220 rev/hr
- Revolutions per Day
- 53,280 rev/day
- Radians per Minute (rad/min)
- 232.47786 rad/min
- Milliradians per Second (mrad/s)
- 3,874.6309 mrad/s
- Period (seconds per rev)
- 1.621622 s/rev
- Exact Formula
- 37 × π/30 = 3.8746309 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 37 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 37 × (π / 30) = 3.874631 rad/s
Exact fraction: 37π/30 rad/s · Reciprocal: 3.875 rad/s × (30/π) = 37 RPM
Reverse Conversion: 3.875 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
37 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
37 RPM = 37π/30 rad/s ≈ 3.874631 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 3.8739 rad/s instead of the exact 3.8746 rad/s — an error of 0.0007309 rad/s.
What this speed looks like in practice
At 37 RPM a shaft turns about 1.11× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.22× faster.
Revolutions over time
That is 2,220 revolutions per hour and 53,280 per day. A quarter turn (90°) takes 405 ms, and the shaft sweeps 0.222° every millisecond.
Rim speed and centripetal load at ω = 3.8746 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.03875 m/s · 0.1395 km/h | 0.1501 m/s² · 0.01531 g |
| 5 cm | 10 cm | 0.1937 m/s · 0.6974 km/h | 0.7506 m/s² · 0.07654 g |
| 10 cm | 20 cm | 0.3875 m/s · 1.395 km/h | 1.501 m/s² · 0.1531 g |
| 25 cm | 50 cm | 0.9687 m/s · 3.487 km/h | 3.753 m/s² · 0.3827 g |
| 50 cm | 1 m | 1.937 m/s · 6.974 km/h | 7.506 m/s² · 0.7654 g |
| 1 m | 2 m | 3.875 m/s · 13.95 km/h | 15.01 m/s² · 1.531 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 37 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.6167 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.233 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.85 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.467 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 12.33 RPM · 1.292 rad/s | ×3 |
| 5:1 | 7.4 RPM · 0.7749 rad/s | ×5 |
| 10:1 | 3.7 RPM · 0.3875 rad/s | ×10 |
| 30:1 | 1.233 RPM · 0.1292 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.007506 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.07506 J |
| 0.1 kg·m² (car flywheel) | 0.7506 J |
| 1 kg·m² (industrial flywheel) | 7.506 J |
Multiples of this speed
- 0.5× = 18.5 RPM1.9373 rad/s
- 2× = 74 RPM7.7493 rad/s
- 5× = 185 RPM19.3732 rad/s
- 10× = 370 RPM38.7463 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 37 RPM to radians per second, multiply 37 by π and divide by 30: 37 × (π / 30) = 3.874631 rad/s (approx. 3.875 rad/s).
37 RPM equals 0.6167 Hz (revolutions per second), calculated by dividing 37 by 60 seconds.
To convert 3.875 rad/s back to RPM, multiply by 30 and divide by π: 3.875 × (30 / π) ≈ 37 RPM.
At 37 RPM, one full 360° revolution takes 1.6216 seconds (1621.62 ms).
A 4-pole induction motor has a synchronous speed of 37 RPM at 1.2333 Hz (f = RPM × poles / 120 = 37 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 3.874631 rad/s × 0.1 m = 0.3875 m/s (1.3949 km/h). The centripetal acceleration at the rim is ω²·r = 1.5013 m/s².