RPM to Radians Per SecondRPM to rad/s

5,500 RPM to Radians Per Second Converter

Instant conversion for 5,500 RPM to rad/s (575.958653 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result575.958653 rad/s
Radians per Second (rad/s)
575.95865
Degrees per Second (°/s)
33,000 °/s
Hertz (Hz)
91.666667 Hz
Revolutions per Second (RPS)
91.666667 rev/s
Revolutions per Hour (RPH)
330,000 rev/hr
Revolutions per Day
7,920,000 rev/day
Radians per Minute (rad/min)
34,557.519 rad/min
Milliradians per Second (mrad/s)
575,958.65 mrad/s
Period (seconds per rev)
0.010909 s/rev
Exact Formula
5500 × π/30 = 575.95865 rad/s
Nearest Real-World Example
Hard drive (5,400 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):575.958653 rad/s
Rounded (0.10472):575.960000 rad/s
Angular Error / Hour:277.81° / hr

Worked Conversion: 5,500 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 5500 × (π / 30) = 575.958653 rad/s

Exact fraction: 5500π/30 rad/s · Reciprocal: 575.96 rad/s × (30/π) = 5,500 RPM

Angular Velocity
575.958653 rad/s
Frequency
91.6667 Hz
Degrees / Second
33,000 °/s
Period per Rev
0.0109 s
Engineering Context: Between five and nine thousand RPM you are at hard-drive spindle and engine-redline speeds, where centrifugal stress scales with the square of angular velocity.

Reverse Conversion: 575.96 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

5,500 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

5,500 RPM = 550π/3 rad/s ≈ 575.958653 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 575.85 rad/s instead of the exact 575.9587 rad/s — an error of 0.1087 rad/s.

What this speed looks like in practice

At 5,500 RPM a shaft turns about 1.02× as fast as a laptop hard drive (5,400 RPM). A desktop hard drive (7,200 RPM) turns about 1.31× faster.

Revolutions over time

That is 330,000 revolutions per hour and 7,920,000 per day. A quarter turn (90°) takes 2.73 ms, and the shaft sweeps 33° every millisecond.

Rim speed and centripetal load at ω = 575.9587 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm5.76 m/s · 20.73 km/h3,317 m/s² · 338.3 g
5 cm10 cm28.8 m/s · 103.7 km/h16,590 m/s² · 1,691 g
10 cm20 cm57.6 m/s · 207.3 km/h33,170 m/s² · 3,383 g
25 cm50 cm144 m/s · 518.4 km/h82,930 m/s² · 8,457 g
50 cm1 m288 m/s · 1,037 km/h165,900 m/s² · 16,910 g
1 m2 m576 m/s · 2,073 km/h331,700 m/s² · 33,830 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 5,500 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
291.67 HzReachable with a VFD
4183.3 HzAbove typical VFD range
6275 HzAbove typical VFD range
8366.7 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:11,833 RPM · 192 rad/s×3
5:11,100 RPM · 115.2 rad/s×5
10:1550 RPM · 57.6 rad/s×10
30:1183.3 RPM · 19.2 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)165.9 J
0.01 kg·m² (bench-grinder wheel)1.659 kJ
0.1 kg·m² (car flywheel)16.59 kJ
1 kg·m² (industrial flywheel)165.9 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions