43 RPM to Radians Per Second Converter
Instant conversion for 43 RPM to rad/s (4.502949 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 4.5029495
- Degrees per Second (°/s)
- 258 °/s
- Hertz (Hz)
- 0.716667 Hz
- Revolutions per Second (RPS)
- 0.716667 rev/s
- Revolutions per Hour (RPH)
- 2,580 rev/hr
- Revolutions per Day
- 61,920 rev/day
- Radians per Minute (rad/min)
- 270.17697 rad/min
- Milliradians per Second (mrad/s)
- 4,502.9495 mrad/s
- Period (seconds per rev)
- 1.395349 s/rev
- Exact Formula
- 43 × π/30 = 4.5029495 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 43 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 43 × (π / 30) = 4.502949 rad/s
Exact fraction: 43π/30 rad/s · Reciprocal: 4.503 rad/s × (30/π) = 43 RPM
Reverse Conversion: 4.503 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
43 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
43 RPM = 43π/30 rad/s ≈ 4.502949 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 4.5021 rad/s instead of the exact 4.5029 rad/s — an error of 0.0008495 rad/s.
What this speed looks like in practice
At 43 RPM a shaft turns about 1.29× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.05× faster.
Revolutions over time
That is 2,580 revolutions per hour and 61,920 per day. A quarter turn (90°) takes 349 ms, and the shaft sweeps 0.258° every millisecond.
Rim speed and centripetal load at ω = 4.5029 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.04503 m/s · 0.1621 km/h | 0.2028 m/s² · 0.02068 g |
| 5 cm | 10 cm | 0.2251 m/s · 0.8105 km/h | 1.014 m/s² · 0.1034 g |
| 10 cm | 20 cm | 0.4503 m/s · 1.621 km/h | 2.028 m/s² · 0.2068 g |
| 25 cm | 50 cm | 1.126 m/s · 4.053 km/h | 5.069 m/s² · 0.5169 g |
| 50 cm | 1 m | 2.251 m/s · 8.105 km/h | 10.14 m/s² · 1.034 g |
| 1 m | 2 m | 4.503 m/s · 16.21 km/h | 20.28 m/s² · 2.068 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 43 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.7167 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.433 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.15 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.867 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 14.33 RPM · 1.501 rad/s | ×3 |
| 5:1 | 8.6 RPM · 0.9006 rad/s | ×5 |
| 10:1 | 4.3 RPM · 0.4503 rad/s | ×10 |
| 30:1 | 1.433 RPM · 0.1501 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01014 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1014 J |
| 0.1 kg·m² (car flywheel) | 1.014 J |
| 1 kg·m² (industrial flywheel) | 10.14 J |
Multiples of this speed
- 0.5× = 21.5 RPM2.2515 rad/s
- 2× = 86 RPM9.0059 rad/s
- 5× = 215 RPM22.5147 rad/s
- 10× = 430 RPM45.0295 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 43 RPM to radians per second, multiply 43 by π and divide by 30: 43 × (π / 30) = 4.502949 rad/s (approx. 4.503 rad/s).
43 RPM equals 0.7167 Hz (revolutions per second), calculated by dividing 43 by 60 seconds.
To convert 4.503 rad/s back to RPM, multiply by 30 and divide by π: 4.503 × (30 / π) ≈ 43 RPM.
At 43 RPM, one full 360° revolution takes 1.3953 seconds (1395.35 ms).
A 4-pole induction motor has a synchronous speed of 43 RPM at 1.4333 Hz (f = RPM × poles / 120 = 43 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 4.502949 rad/s × 0.1 m = 0.4503 m/s (1.6211 km/h). The centripetal acceleration at the rim is ω²·r = 2.0277 m/s².