42 RPM to Radians Per Second Converter
Instant conversion for 42 RPM to rad/s (4.398230 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 4.3982297
- Degrees per Second (°/s)
- 252 °/s
- Hertz (Hz)
- 0.7 Hz
- Revolutions per Second (RPS)
- 0.7 rev/s
- Revolutions per Hour (RPH)
- 2,520 rev/hr
- Revolutions per Day
- 60,480 rev/day
- Radians per Minute (rad/min)
- 263.89378 rad/min
- Milliradians per Second (mrad/s)
- 4,398.2297 mrad/s
- Period (seconds per rev)
- 1.428571 s/rev
- Exact Formula
- 42 × π/30 = 4.3982297 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 42 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 42 × (π / 30) = 4.398230 rad/s
Exact fraction: 42π/30 rad/s · Reciprocal: 4.398 rad/s × (30/π) = 42 RPM
Reverse Conversion: 4.398 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
42 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
42 RPM = 7π/5 rad/s ≈ 4.39823 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 4.3974 rad/s instead of the exact 4.3982 rad/s — an error of 0.0008297 rad/s.
What this speed looks like in practice
At 42 RPM a shaft turns about 1.26× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.07× faster.
Revolutions over time
That is 2,520 revolutions per hour and 60,480 per day. A quarter turn (90°) takes 357 ms, and the shaft sweeps 0.252° every millisecond.
Rim speed and centripetal load at ω = 4.3982 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.04398 m/s · 0.1583 km/h | 0.1934 m/s² · 0.01973 g |
| 5 cm | 10 cm | 0.2199 m/s · 0.7917 km/h | 0.9672 m/s² · 0.09863 g |
| 10 cm | 20 cm | 0.4398 m/s · 1.583 km/h | 1.934 m/s² · 0.1973 g |
| 25 cm | 50 cm | 1.1 m/s · 3.958 km/h | 4.836 m/s² · 0.4931 g |
| 50 cm | 1 m | 2.199 m/s · 7.917 km/h | 9.672 m/s² · 0.9863 g |
| 1 m | 2 m | 4.398 m/s · 15.83 km/h | 19.34 m/s² · 1.973 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 42 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.7 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.4 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.1 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.8 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 14 RPM · 1.466 rad/s | ×3 |
| 5:1 | 8.4 RPM · 0.8796 rad/s | ×5 |
| 10:1 | 4.2 RPM · 0.4398 rad/s | ×10 |
| 30:1 | 1.4 RPM · 0.1466 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.009672 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.09672 J |
| 0.1 kg·m² (car flywheel) | 0.9672 J |
| 1 kg·m² (industrial flywheel) | 9.672 J |
Multiples of this speed
- 0.5× = 21 RPM2.1991 rad/s
- 2× = 84 RPM8.7965 rad/s
- 5× = 210 RPM21.9911 rad/s
- 10× = 420 RPM43.9823 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 42 RPM to radians per second, multiply 42 by π and divide by 30: 42 × (π / 30) = 4.398230 rad/s (approx. 4.398 rad/s).
42 RPM equals 0.7000 Hz (revolutions per second), calculated by dividing 42 by 60 seconds.
To convert 4.398 rad/s back to RPM, multiply by 30 and divide by π: 4.398 × (30 / π) ≈ 42 RPM.
At 42 RPM, one full 360° revolution takes 1.4286 seconds (1428.57 ms).
A 4-pole induction motor has a synchronous speed of 42 RPM at 1.4 Hz (f = RPM × poles / 120 = 42 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 4.398230 rad/s × 0.1 m = 0.4398 m/s (1.5834 km/h). The centripetal acceleration at the rim is ω²·r = 1.9344 m/s².