84 RPM to Radians Per Second Converter
Instant conversion for 84 RPM to rad/s (8.796459 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 8.7964594
- Degrees per Second (°/s)
- 504 °/s
- Hertz (Hz)
- 1.4 Hz
- Revolutions per Second (RPS)
- 1.4 rev/s
- Revolutions per Hour (RPH)
- 5,040 rev/hr
- Revolutions per Day
- 120,960 rev/day
- Radians per Minute (rad/min)
- 527.78757 rad/min
- Milliradians per Second (mrad/s)
- 8,796.4594 mrad/s
- Period (seconds per rev)
- 0.714286 s/rev
- Exact Formula
- 84 × π/30 = 8.7964594 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 84 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 84 × (π / 30) = 8.796459 rad/s
Exact fraction: 84π/30 rad/s · Reciprocal: 8.796 rad/s × (30/π) = 84 RPM
Reverse Conversion: 8.796 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
84 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
84 RPM = 14π/5 rad/s ≈ 8.796459 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 8.7948 rad/s instead of the exact 8.7965 rad/s — an error of 0.001659 rad/s.
What this speed looks like in practice
At 84 RPM a shaft turns about 1.87× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.38× faster.
Revolutions over time
That is 5,040 revolutions per hour and 120,960 per day. A quarter turn (90°) takes 179 ms, and the shaft sweeps 0.504° every millisecond.
Rim speed and centripetal load at ω = 8.7965 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.08796 m/s · 0.3167 km/h | 0.7738 m/s² · 0.0789 g |
| 5 cm | 10 cm | 0.4398 m/s · 1.583 km/h | 3.869 m/s² · 0.3945 g |
| 10 cm | 20 cm | 0.8796 m/s · 3.167 km/h | 7.738 m/s² · 0.789 g |
| 25 cm | 50 cm | 2.199 m/s · 7.917 km/h | 19.34 m/s² · 1.973 g |
| 50 cm | 1 m | 4.398 m/s · 15.83 km/h | 38.69 m/s² · 3.945 g |
| 1 m | 2 m | 8.796 m/s · 31.67 km/h | 77.38 m/s² · 7.89 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 84 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.4 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.8 Hz | Below typical VFD range — use a gearbox |
| 6 | 4.2 Hz | Below typical VFD range — use a gearbox |
| 8 | 5.6 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 28 RPM · 2.932 rad/s | ×3 |
| 5:1 | 16.8 RPM · 1.759 rad/s | ×5 |
| 10:1 | 8.4 RPM · 0.8796 rad/s | ×10 |
| 30:1 | 2.8 RPM · 0.2932 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.03869 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.3869 J |
| 0.1 kg·m² (car flywheel) | 3.869 J |
| 1 kg·m² (industrial flywheel) | 38.69 J |
Multiples of this speed
- 0.5× = 42 RPM4.3982 rad/s
- 2× = 168 RPM17.5929 rad/s
- 5× = 420 RPM43.9823 rad/s
- 10× = 840 RPM87.9646 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 84 RPM to radians per second, multiply 84 by π and divide by 30: 84 × (π / 30) = 8.796459 rad/s (approx. 8.796 rad/s).
84 RPM equals 1.4000 Hz (revolutions per second), calculated by dividing 84 by 60 seconds.
To convert 8.796 rad/s back to RPM, multiply by 30 and divide by π: 8.796 × (30 / π) ≈ 84 RPM.
At 84 RPM, one full 360° revolution takes 0.7143 seconds (714.29 ms).
A 4-pole induction motor has a synchronous speed of 84 RPM at 2.8 Hz (f = RPM × poles / 120 = 84 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 8.796459 rad/s × 0.1 m = 0.8796 m/s (3.1667 km/h). The centripetal acceleration at the rim is ω²·r = 7.7378 m/s².