3,200 RPM to Radians Per Second Converter
Instant conversion for 3,200 RPM to rad/s (335.103216 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 335.10322
- Degrees per Second (°/s)
- 19,200 °/s
- Hertz (Hz)
- 53.333333 Hz
- Revolutions per Second (RPS)
- 53.333333 rev/s
- Revolutions per Hour (RPH)
- 192,000 rev/hr
- Revolutions per Day
- 4,608,000 rev/day
- Radians per Minute (rad/min)
- 20,106.193 rad/min
- Milliradians per Second (mrad/s)
- 335,103.22 mrad/s
- Period (seconds per rev)
- 0.01875 s/rev
- Exact Formula
- 3200 × π/30 = 335.10322 rad/s
- Nearest Real-World Example
- Car engine — highway (2,500 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 3,200 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 3200 × (π / 30) = 335.103216 rad/s
Exact fraction: 3200π/30 rad/s · Reciprocal: 335.1 rad/s × (30/π) = 3,200 RPM
Reverse Conversion: 335.1 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
3,200 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
3,200 RPM = 320π/3 rad/s ≈ 335.103216 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 335.04 rad/s instead of the exact 335.1032 rad/s — an error of 0.06322 rad/s.
What this speed looks like in practice
At 3,200 RPM a shaft turns about 1.78× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.69× faster.
Revolutions over time
That is 192,000 revolutions per hour and 4,608,000 per day. A quarter turn (90°) takes 4.69 ms, and the shaft sweeps 19.2° every millisecond.
Rim speed and centripetal load at ω = 335.1032 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 3.351 m/s · 12.06 km/h | 1,123 m/s² · 114.5 g |
| 5 cm | 10 cm | 16.76 m/s · 60.32 km/h | 5,615 m/s² · 572.5 g |
| 10 cm | 20 cm | 33.51 m/s · 120.6 km/h | 11,230 m/s² · 1,145 g |
| 25 cm | 50 cm | 83.78 m/s · 301.6 km/h | 28,070 m/s² · 2,863 g |
| 50 cm | 1 m | 167.6 m/s · 603.2 km/h | 56,150 m/s² · 5,725 g |
| 1 m | 2 m | 335.1 m/s · 1,206 km/h | 112,300 m/s² · 11,450 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 3,200 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 53.33 Hz | Reachable with a VFD |
| 4 | 106.7 Hz | Reachable with a VFD |
| 6 | 160 Hz | Above typical VFD range |
| 8 | 213.3 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,067 RPM · 111.7 rad/s | ×3 |
| 5:1 | 640 RPM · 67.02 rad/s | ×5 |
| 10:1 | 320 RPM · 33.51 rad/s | ×10 |
| 30:1 | 106.7 RPM · 11.17 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 56.15 J |
| 0.01 kg·m² (bench-grinder wheel) | 561.5 J |
| 0.1 kg·m² (car flywheel) | 5.615 kJ |
| 1 kg·m² (industrial flywheel) | 56.15 kJ |
Multiples of this speed
- 0.5× = 1,600 RPM167.5516 rad/s
- 2× = 6,400 RPM670.2064 rad/s
- 5× = 16,000 RPM1,675.5161 rad/s
- 10× = 32,000 RPM3,351.0322 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 3,200 RPM to radians per second, multiply 3200 by π and divide by 30: 3200 × (π / 30) = 335.103216 rad/s (approx. 335.1 rad/s).
3,200 RPM equals 53.3333 Hz (revolutions per second), calculated by dividing 3200 by 60 seconds.
To convert 335.1 rad/s back to RPM, multiply by 30 and divide by π: 335.1 × (30 / π) ≈ 3,200 RPM.
At 3,200 RPM, one full 360° revolution takes 0.0187 seconds (18.75 ms).
A 4-pole induction motor has a synchronous speed of 3,200 RPM at 106.6667 Hz (f = RPM × poles / 120 = 3200 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 335.103216 rad/s × 0.1 m = 33.5103 m/s (120.6372 km/h). The centripetal acceleration at the rim is ω²·r = 11229.4166 m/s².