22 RPM to Radians Per Second Converter
Instant conversion for 22 RPM to rad/s (2.303835 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 2.3038346
- Degrees per Second (°/s)
- 132 °/s
- Hertz (Hz)
- 0.366667 Hz
- Revolutions per Second (RPS)
- 0.366667 rev/s
- Revolutions per Hour (RPH)
- 1,320 rev/hr
- Revolutions per Day
- 31,680 rev/day
- Radians per Minute (rad/min)
- 138.23008 rad/min
- Milliradians per Second (mrad/s)
- 2,303.8346 mrad/s
- Period (seconds per rev)
- 2.727273 s/rev
- Exact Formula
- 22 × π/30 = 2.3038346 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 22 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 22 × (π / 30) = 2.303835 rad/s
Exact fraction: 22π/30 rad/s · Reciprocal: 2.304 rad/s × (30/π) = 22 RPM
Reverse Conversion: 2.304 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
22 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
22 RPM = 11π/15 rad/s ≈ 2.303835 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 2.3034 rad/s instead of the exact 2.3038 rad/s — an error of 0.0004346 rad/s.
What this speed looks like in practice
At 22 RPM a shaft turns about 1.47× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.52× faster.
Revolutions over time
That is 1,320 revolutions per hour and 31,680 per day. A quarter turn (90°) takes 682 ms, and the shaft sweeps 0.132° every millisecond.
Rim speed and centripetal load at ω = 2.3038 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.02304 m/s · 0.08294 km/h | 0.05308 m/s² · 0.005412 g |
| 5 cm | 10 cm | 0.1152 m/s · 0.4147 km/h | 0.2654 m/s² · 0.02706 g |
| 10 cm | 20 cm | 0.2304 m/s · 0.8294 km/h | 0.5308 m/s² · 0.05412 g |
| 25 cm | 50 cm | 0.576 m/s · 2.073 km/h | 1.327 m/s² · 0.1353 g |
| 50 cm | 1 m | 1.152 m/s · 4.147 km/h | 2.654 m/s² · 0.2706 g |
| 1 m | 2 m | 2.304 m/s · 8.294 km/h | 5.308 m/s² · 0.5412 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 22 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.3667 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.7333 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.1 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.467 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 7.333 RPM · 0.7679 rad/s | ×3 |
| 5:1 | 4.4 RPM · 0.4608 rad/s | ×5 |
| 10:1 | 2.2 RPM · 0.2304 rad/s | ×10 |
| 30:1 | 0.7333 RPM · 0.07679 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.002654 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.02654 J |
| 0.1 kg·m² (car flywheel) | 0.2654 J |
| 1 kg·m² (industrial flywheel) | 2.654 J |
Multiples of this speed
- 0.5× = 11 RPM1.1519 rad/s
- 2× = 44 RPM4.6077 rad/s
- 5× = 110 RPM11.5192 rad/s
- 10× = 220 RPM23.0383 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 22 RPM to radians per second, multiply 22 by π and divide by 30: 22 × (π / 30) = 2.303835 rad/s (approx. 2.304 rad/s).
22 RPM equals 0.3667 Hz (revolutions per second), calculated by dividing 22 by 60 seconds.
To convert 2.304 rad/s back to RPM, multiply by 30 and divide by π: 2.304 × (30 / π) ≈ 22 RPM.
At 22 RPM, one full 360° revolution takes 2.7273 seconds (2727.27 ms).
A 4-pole induction motor has a synchronous speed of 22 RPM at 0.7333 Hz (f = RPM × poles / 120 = 22 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 2.303835 rad/s × 0.1 m = 0.2304 m/s (0.8294 km/h). The centripetal acceleration at the rim is ω²·r = 0.5308 m/s².