23 RPM to Radians Per Second Converter
Instant conversion for 23 RPM to rad/s (2.408554 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 2.4085544
- Degrees per Second (°/s)
- 138 °/s
- Hertz (Hz)
- 0.383333 Hz
- Revolutions per Second (RPS)
- 0.383333 rev/s
- Revolutions per Hour (RPH)
- 1,380 rev/hr
- Revolutions per Day
- 33,120 rev/day
- Radians per Minute (rad/min)
- 144.51326 rad/min
- Milliradians per Second (mrad/s)
- 2,408.5544 mrad/s
- Period (seconds per rev)
- 2.608696 s/rev
- Exact Formula
- 23 × π/30 = 2.4085544 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 23 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 23 × (π / 30) = 2.408554 rad/s
Exact fraction: 23π/30 rad/s · Reciprocal: 2.409 rad/s × (30/π) = 23 RPM
Reverse Conversion: 2.409 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
23 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
23 RPM = 23π/30 rad/s ≈ 2.408554 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 2.4081 rad/s instead of the exact 2.4086 rad/s — an error of 0.0004544 rad/s.
What this speed looks like in practice
At 23 RPM a shaft turns about 1.53× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.45× faster.
Revolutions over time
That is 1,380 revolutions per hour and 33,120 per day. A quarter turn (90°) takes 652 ms, and the shaft sweeps 0.138° every millisecond.
Rim speed and centripetal load at ω = 2.4086 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.02409 m/s · 0.08671 km/h | 0.05801 m/s² · 0.005916 g |
| 5 cm | 10 cm | 0.1204 m/s · 0.4335 km/h | 0.2901 m/s² · 0.02958 g |
| 10 cm | 20 cm | 0.2409 m/s · 0.8671 km/h | 0.5801 m/s² · 0.05916 g |
| 25 cm | 50 cm | 0.6021 m/s · 2.168 km/h | 1.45 m/s² · 0.1479 g |
| 50 cm | 1 m | 1.204 m/s · 4.335 km/h | 2.901 m/s² · 0.2958 g |
| 1 m | 2 m | 2.409 m/s · 8.671 km/h | 5.801 m/s² · 0.5916 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 23 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.3833 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.7667 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.15 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.533 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 7.667 RPM · 0.8029 rad/s | ×3 |
| 5:1 | 4.6 RPM · 0.4817 rad/s | ×5 |
| 10:1 | 2.3 RPM · 0.2409 rad/s | ×10 |
| 30:1 | 0.7667 RPM · 0.08029 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.002901 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.02901 J |
| 0.1 kg·m² (car flywheel) | 0.2901 J |
| 1 kg·m² (industrial flywheel) | 2.901 J |
Multiples of this speed
- 0.5× = 11.5 RPM1.2043 rad/s
- 2× = 46 RPM4.8171 rad/s
- 5× = 115 RPM12.0428 rad/s
- 10× = 230 RPM24.0855 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 23 RPM to radians per second, multiply 23 by π and divide by 30: 23 × (π / 30) = 2.408554 rad/s (approx. 2.409 rad/s).
23 RPM equals 0.3833 Hz (revolutions per second), calculated by dividing 23 by 60 seconds.
To convert 2.409 rad/s back to RPM, multiply by 30 and divide by π: 2.409 × (30 / π) ≈ 23 RPM.
At 23 RPM, one full 360° revolution takes 2.6087 seconds (2608.70 ms).
A 4-pole induction motor has a synchronous speed of 23 RPM at 0.7667 Hz (f = RPM × poles / 120 = 23 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 2.408554 rad/s × 0.1 m = 0.2409 m/s (0.8671 km/h). The centripetal acceleration at the rim is ω²·r = 0.5801 m/s².