88 RPM to Radians Per Second Converter
Instant conversion for 88 RPM to rad/s (9.215338 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 9.2153385
- Degrees per Second (°/s)
- 528 °/s
- Hertz (Hz)
- 1.466667 Hz
- Revolutions per Second (RPS)
- 1.466667 rev/s
- Revolutions per Hour (RPH)
- 5,280 rev/hr
- Revolutions per Day
- 126,720 rev/day
- Radians per Minute (rad/min)
- 552.92031 rad/min
- Milliradians per Second (mrad/s)
- 9,215.3385 mrad/s
- Period (seconds per rev)
- 0.681818 s/rev
- Exact Formula
- 88 × π/30 = 9.2153385 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 88 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 88 × (π / 30) = 9.215338 rad/s
Exact fraction: 88π/30 rad/s · Reciprocal: 9.215 rad/s × (30/π) = 88 RPM
Reverse Conversion: 9.215 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
88 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
88 RPM = 44π/15 rad/s ≈ 9.215338 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 9.2136 rad/s instead of the exact 9.2153 rad/s — an error of 0.001738 rad/s.
What this speed looks like in practice
At 88 RPM a shaft turns about 1.96× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.27× faster.
Revolutions over time
That is 5,280 revolutions per hour and 126,720 per day. A quarter turn (90°) takes 170 ms, and the shaft sweeps 0.528° every millisecond.
Rim speed and centripetal load at ω = 9.2153 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.09215 m/s · 0.3318 km/h | 0.8492 m/s² · 0.0866 g |
| 5 cm | 10 cm | 0.4608 m/s · 1.659 km/h | 4.246 m/s² · 0.433 g |
| 10 cm | 20 cm | 0.9215 m/s · 3.318 km/h | 8.492 m/s² · 0.866 g |
| 25 cm | 50 cm | 2.304 m/s · 8.294 km/h | 21.23 m/s² · 2.165 g |
| 50 cm | 1 m | 4.608 m/s · 16.59 km/h | 42.46 m/s² · 4.33 g |
| 1 m | 2 m | 9.215 m/s · 33.18 km/h | 84.92 m/s² · 8.66 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 88 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.467 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.933 Hz | Below typical VFD range — use a gearbox |
| 6 | 4.4 Hz | Below typical VFD range — use a gearbox |
| 8 | 5.867 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 29.33 RPM · 3.072 rad/s | ×3 |
| 5:1 | 17.6 RPM · 1.843 rad/s | ×5 |
| 10:1 | 8.8 RPM · 0.9215 rad/s | ×10 |
| 30:1 | 2.933 RPM · 0.3072 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.04246 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.4246 J |
| 0.1 kg·m² (car flywheel) | 4.246 J |
| 1 kg·m² (industrial flywheel) | 42.46 J |
Multiples of this speed
- 0.5× = 44 RPM4.6077 rad/s
- 2× = 176 RPM18.4307 rad/s
- 5× = 440 RPM46.0767 rad/s
- 10× = 880 RPM92.1534 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 88 RPM to radians per second, multiply 88 by π and divide by 30: 88 × (π / 30) = 9.215338 rad/s (approx. 9.215 rad/s).
88 RPM equals 1.4667 Hz (revolutions per second), calculated by dividing 88 by 60 seconds.
To convert 9.215 rad/s back to RPM, multiply by 30 and divide by π: 9.215 × (30 / π) ≈ 88 RPM.
At 88 RPM, one full 360° revolution takes 0.6818 seconds (681.82 ms).
A 4-pole induction motor has a synchronous speed of 88 RPM at 2.9333 Hz (f = RPM × poles / 120 = 88 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 9.215338 rad/s × 0.1 m = 0.9215 m/s (3.3175 km/h). The centripetal acceleration at the rim is ω²·r = 8.4922 m/s².