RPM to Radians Per SecondRPM to rad/s

87 RPM to Radians Per Second Converter

Instant conversion for 87 RPM to rad/s (9.110619 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result9.110619 rad/s
Radians per Second (rad/s)
9.1106187
Degrees per Second (°/s)
522 °/s
Hertz (Hz)
1.45 Hz
Revolutions per Second (RPS)
1.45 rev/s
Revolutions per Hour (RPH)
5,220 rev/hr
Revolutions per Day
125,280 rev/day
Radians per Minute (rad/min)
546.63712 rad/min
Milliradians per Second (mrad/s)
9,110.6187 mrad/s
Period (seconds per rev)
0.689655 s/rev
Exact Formula
87 × π/30 = 9.1106187 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):9.110619 rad/s
Rounded (0.10472):9.110640 rad/s
Angular Error / Hour:4.39° / hr

Worked Conversion: 87 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 87 × (π / 30) = 9.110619 rad/s

Exact fraction: 87π/30 rad/s · Reciprocal: 9.111 rad/s × (30/π) = 87 RPM

Angular Velocity
9.110619 rad/s
Frequency
1.45 Hz
Degrees / Second
522 °/s
Period per Rev
0.6897 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 9.111 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

87 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

87 RPM = 29π/10 rad/s ≈ 9.110619 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 9.1089 rad/s instead of the exact 9.1106 rad/s — an error of 0.001719 rad/s.

What this speed looks like in practice

At 87 RPM a shaft turns about 1.93× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.3× faster.

Revolutions over time

That is 5,220 revolutions per hour and 125,280 per day. A quarter turn (90°) takes 172 ms, and the shaft sweeps 0.522° every millisecond.

Rim speed and centripetal load at ω = 9.1106 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.09111 m/s · 0.328 km/h0.83 m/s² · 0.08464 g
5 cm10 cm0.4555 m/s · 1.64 km/h4.15 m/s² · 0.4232 g
10 cm20 cm0.9111 m/s · 3.28 km/h8.3 m/s² · 0.8464 g
25 cm50 cm2.278 m/s · 8.2 km/h20.75 m/s² · 2.116 g
50 cm1 m4.555 m/s · 16.4 km/h41.5 m/s² · 4.232 g
1 m2 m9.111 m/s · 32.8 km/h83 m/s² · 8.464 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 87 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.45 HzBelow typical VFD range — use a gearbox
42.9 HzBelow typical VFD range — use a gearbox
64.35 HzBelow typical VFD range — use a gearbox
85.8 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:129 RPM · 3.037 rad/s×3
5:117.4 RPM · 1.822 rad/s×5
10:18.7 RPM · 0.9111 rad/s×10
30:12.9 RPM · 0.3037 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.0415 J
0.01 kg·m² (bench-grinder wheel)0.415 J
0.1 kg·m² (car flywheel)4.15 J
1 kg·m² (industrial flywheel)41.5 J

Multiples of this speed

  • 0.5× = 43.5 RPM4.5553 rad/s
  • 2× = 174 RPM18.2212 rad/s
  • 5× = 435 RPM45.5531 rad/s
  • 10× = 870 RPM91.1062 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions