67 RPM to Radians Per Second Converter
Instant conversion for 67 RPM to rad/s (7.016224 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 7.0162236
- Degrees per Second (°/s)
- 402 °/s
- Hertz (Hz)
- 1.116667 Hz
- Revolutions per Second (RPS)
- 1.116667 rev/s
- Revolutions per Hour (RPH)
- 4,020 rev/hr
- Revolutions per Day
- 96,480 rev/day
- Radians per Minute (rad/min)
- 420.97342 rad/min
- Milliradians per Second (mrad/s)
- 7,016.2236 mrad/s
- Period (seconds per rev)
- 0.895522 s/rev
- Exact Formula
- 67 × π/30 = 7.0162236 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 67 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 67 × (π / 30) = 7.016224 rad/s
Exact fraction: 67π/30 rad/s · Reciprocal: 7.016 rad/s × (30/π) = 67 RPM
Reverse Conversion: 7.016 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
67 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
67 RPM = 67π/30 rad/s ≈ 7.016224 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 7.0149 rad/s instead of the exact 7.0162 rad/s — an error of 0.001324 rad/s.
What this speed looks like in practice
At 67 RPM a shaft turns about 1.49× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.99× faster.
Revolutions over time
That is 4,020 revolutions per hour and 96,480 per day. A quarter turn (90°) takes 224 ms, and the shaft sweeps 0.402° every millisecond.
Rim speed and centripetal load at ω = 7.0162 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.07016 m/s · 0.2526 km/h | 0.4923 m/s² · 0.0502 g |
| 5 cm | 10 cm | 0.3508 m/s · 1.263 km/h | 2.461 m/s² · 0.251 g |
| 10 cm | 20 cm | 0.7016 m/s · 2.526 km/h | 4.923 m/s² · 0.502 g |
| 25 cm | 50 cm | 1.754 m/s · 6.315 km/h | 12.31 m/s² · 1.255 g |
| 50 cm | 1 m | 3.508 m/s · 12.63 km/h | 24.61 m/s² · 2.51 g |
| 1 m | 2 m | 7.016 m/s · 25.26 km/h | 49.23 m/s² · 5.02 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 67 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.117 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.233 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.35 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.467 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 22.33 RPM · 2.339 rad/s | ×3 |
| 5:1 | 13.4 RPM · 1.403 rad/s | ×5 |
| 10:1 | 6.7 RPM · 0.7016 rad/s | ×10 |
| 30:1 | 2.233 RPM · 0.2339 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02461 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2461 J |
| 0.1 kg·m² (car flywheel) | 2.461 J |
| 1 kg·m² (industrial flywheel) | 24.61 J |
Multiples of this speed
- 0.5× = 33.5 RPM3.5081 rad/s
- 2× = 134 RPM14.0324 rad/s
- 5× = 335 RPM35.0811 rad/s
- 10× = 670 RPM70.1622 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 67 RPM to radians per second, multiply 67 by π and divide by 30: 67 × (π / 30) = 7.016224 rad/s (approx. 7.016 rad/s).
67 RPM equals 1.1167 Hz (revolutions per second), calculated by dividing 67 by 60 seconds.
To convert 7.016 rad/s back to RPM, multiply by 30 and divide by π: 7.016 × (30 / π) ≈ 67 RPM.
At 67 RPM, one full 360° revolution takes 0.8955 seconds (895.52 ms).
A 4-pole induction motor has a synchronous speed of 67 RPM at 2.2333 Hz (f = RPM × poles / 120 = 67 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 7.016224 rad/s × 0.1 m = 0.7016 m/s (2.5258 km/h). The centripetal acceleration at the rim is ω²·r = 4.9227 m/s².