66 RPM to Radians Per Second Converter
Instant conversion for 66 RPM to rad/s (6.911504 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 6.9115038
- Degrees per Second (°/s)
- 396 °/s
- Hertz (Hz)
- 1.1 Hz
- Revolutions per Second (RPS)
- 1.1 rev/s
- Revolutions per Hour (RPH)
- 3,960 rev/hr
- Revolutions per Day
- 95,040 rev/day
- Radians per Minute (rad/min)
- 414.69023 rad/min
- Milliradians per Second (mrad/s)
- 6,911.5038 mrad/s
- Period (seconds per rev)
- 0.909091 s/rev
- Exact Formula
- 66 × π/30 = 6.9115038 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 66 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 66 × (π / 30) = 6.911504 rad/s
Exact fraction: 66π/30 rad/s · Reciprocal: 6.912 rad/s × (30/π) = 66 RPM
Reverse Conversion: 6.912 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
66 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
66 RPM = 11π/5 rad/s ≈ 6.911504 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 6.9102 rad/s instead of the exact 6.9115 rad/s — an error of 0.001304 rad/s.
What this speed looks like in practice
At 66 RPM a shaft turns about 1.47× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.03× faster.
Revolutions over time
That is 3,960 revolutions per hour and 95,040 per day. A quarter turn (90°) takes 227 ms, and the shaft sweeps 0.396° every millisecond.
Rim speed and centripetal load at ω = 6.9115 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.06912 m/s · 0.2488 km/h | 0.4777 m/s² · 0.04871 g |
| 5 cm | 10 cm | 0.3456 m/s · 1.244 km/h | 2.388 m/s² · 0.2436 g |
| 10 cm | 20 cm | 0.6912 m/s · 2.488 km/h | 4.777 m/s² · 0.4871 g |
| 25 cm | 50 cm | 1.728 m/s · 6.22 km/h | 11.94 m/s² · 1.218 g |
| 50 cm | 1 m | 3.456 m/s · 12.44 km/h | 23.88 m/s² · 2.436 g |
| 1 m | 2 m | 6.912 m/s · 24.88 km/h | 47.77 m/s² · 4.871 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 66 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.1 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.2 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.3 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.4 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 22 RPM · 2.304 rad/s | ×3 |
| 5:1 | 13.2 RPM · 1.382 rad/s | ×5 |
| 10:1 | 6.6 RPM · 0.6912 rad/s | ×10 |
| 30:1 | 2.2 RPM · 0.2304 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02388 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2388 J |
| 0.1 kg·m² (car flywheel) | 2.388 J |
| 1 kg·m² (industrial flywheel) | 23.88 J |
Multiples of this speed
- 0.5× = 33 RPM3.4558 rad/s
- 2× = 132 RPM13.823 rad/s
- 5× = 330 RPM34.5575 rad/s
- 10× = 660 RPM69.115 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 66 RPM to radians per second, multiply 66 by π and divide by 30: 66 × (π / 30) = 6.911504 rad/s (approx. 6.912 rad/s).
66 RPM equals 1.1000 Hz (revolutions per second), calculated by dividing 66 by 60 seconds.
To convert 6.912 rad/s back to RPM, multiply by 30 and divide by π: 6.912 × (30 / π) ≈ 66 RPM.
At 66 RPM, one full 360° revolution takes 0.9091 seconds (909.09 ms).
A 4-pole induction motor has a synchronous speed of 66 RPM at 2.2 Hz (f = RPM × poles / 120 = 66 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 6.911504 rad/s × 0.1 m = 0.6912 m/s (2.4881 km/h). The centripetal acceleration at the rim is ω²·r = 4.7769 m/s².