77 RPM to Radians Per Second Converter
Instant conversion for 77 RPM to rad/s (8.063421 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 8.0634211
- Degrees per Second (°/s)
- 462 °/s
- Hertz (Hz)
- 1.283333 Hz
- Revolutions per Second (RPS)
- 1.283333 rev/s
- Revolutions per Hour (RPH)
- 4,620 rev/hr
- Revolutions per Day
- 110,880 rev/day
- Radians per Minute (rad/min)
- 483.80527 rad/min
- Milliradians per Second (mrad/s)
- 8,063.4211 mrad/s
- Period (seconds per rev)
- 0.779221 s/rev
- Exact Formula
- 77 × π/30 = 8.0634211 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 77 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 77 × (π / 30) = 8.063421 rad/s
Exact fraction: 77π/30 rad/s · Reciprocal: 8.063 rad/s × (30/π) = 77 RPM
Reverse Conversion: 8.063 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
77 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
77 RPM = 77π/30 rad/s ≈ 8.063421 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 8.0619 rad/s instead of the exact 8.0634 rad/s — an error of 0.001521 rad/s.
What this speed looks like in practice
At 77 RPM a shaft turns about 1.71× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.6× faster.
Revolutions over time
That is 4,620 revolutions per hour and 110,880 per day. A quarter turn (90°) takes 195 ms, and the shaft sweeps 0.462° every millisecond.
Rim speed and centripetal load at ω = 8.0634 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.08063 m/s · 0.2903 km/h | 0.6502 m/s² · 0.0663 g |
| 5 cm | 10 cm | 0.4032 m/s · 1.451 km/h | 3.251 m/s² · 0.3315 g |
| 10 cm | 20 cm | 0.8063 m/s · 2.903 km/h | 6.502 m/s² · 0.663 g |
| 25 cm | 50 cm | 2.016 m/s · 7.257 km/h | 16.25 m/s² · 1.658 g |
| 50 cm | 1 m | 4.032 m/s · 14.51 km/h | 32.51 m/s² · 3.315 g |
| 1 m | 2 m | 8.063 m/s · 29.03 km/h | 65.02 m/s² · 6.63 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 77 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.283 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.567 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.85 Hz | Below typical VFD range — use a gearbox |
| 8 | 5.133 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 25.67 RPM · 2.688 rad/s | ×3 |
| 5:1 | 15.4 RPM · 1.613 rad/s | ×5 |
| 10:1 | 7.7 RPM · 0.8063 rad/s | ×10 |
| 30:1 | 2.567 RPM · 0.2688 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.03251 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.3251 J |
| 0.1 kg·m² (car flywheel) | 3.251 J |
| 1 kg·m² (industrial flywheel) | 32.51 J |
Multiples of this speed
- 0.5× = 38.5 RPM4.0317 rad/s
- 2× = 154 RPM16.1268 rad/s
- 5× = 385 RPM40.3171 rad/s
- 10× = 770 RPM80.6342 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 77 RPM to radians per second, multiply 77 by π and divide by 30: 77 × (π / 30) = 8.063421 rad/s (approx. 8.063 rad/s).
77 RPM equals 1.2833 Hz (revolutions per second), calculated by dividing 77 by 60 seconds.
To convert 8.063 rad/s back to RPM, multiply by 30 and divide by π: 8.063 × (30 / π) ≈ 77 RPM.
At 77 RPM, one full 360° revolution takes 0.7792 seconds (779.22 ms).
A 4-pole induction motor has a synchronous speed of 77 RPM at 2.5667 Hz (f = RPM × poles / 120 = 77 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 8.063421 rad/s × 0.1 m = 0.8063 m/s (2.9028 km/h). The centripetal acceleration at the rim is ω²·r = 6.5019 m/s².