61 RPM to Radians Per Second Converter
Instant conversion for 61 RPM to rad/s (6.387905 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 6.3879051
- Degrees per Second (°/s)
- 366 °/s
- Hertz (Hz)
- 1.016667 Hz
- Revolutions per Second (RPS)
- 1.016667 rev/s
- Revolutions per Hour (RPH)
- 3,660 rev/hr
- Revolutions per Day
- 87,840 rev/day
- Radians per Minute (rad/min)
- 383.2743 rad/min
- Milliradians per Second (mrad/s)
- 6,387.9051 mrad/s
- Period (seconds per rev)
- 0.983607 s/rev
- Exact Formula
- 61 × π/30 = 6.3879051 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 61 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 61 × (π / 30) = 6.387905 rad/s
Exact fraction: 61π/30 rad/s · Reciprocal: 6.388 rad/s × (30/π) = 61 RPM
Reverse Conversion: 6.388 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
61 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
61 RPM = 61π/30 rad/s ≈ 6.387905 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 6.3867 rad/s instead of the exact 6.3879 rad/s — an error of 0.001205 rad/s.
What this speed looks like in practice
At 61 RPM a shaft turns about 1.36× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.28× faster.
Revolutions over time
That is 3,660 revolutions per hour and 87,840 per day. A quarter turn (90°) takes 246 ms, and the shaft sweeps 0.366° every millisecond.
Rim speed and centripetal load at ω = 6.3879 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.06388 m/s · 0.23 km/h | 0.4081 m/s² · 0.04161 g |
| 5 cm | 10 cm | 0.3194 m/s · 1.15 km/h | 2.04 m/s² · 0.208 g |
| 10 cm | 20 cm | 0.6388 m/s · 2.3 km/h | 4.081 m/s² · 0.4161 g |
| 25 cm | 50 cm | 1.597 m/s · 5.749 km/h | 10.2 m/s² · 1.04 g |
| 50 cm | 1 m | 3.194 m/s · 11.5 km/h | 20.4 m/s² · 2.08 g |
| 1 m | 2 m | 6.388 m/s · 23 km/h | 40.81 m/s² · 4.161 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 61 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.017 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.033 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.05 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.067 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 20.33 RPM · 2.129 rad/s | ×3 |
| 5:1 | 12.2 RPM · 1.278 rad/s | ×5 |
| 10:1 | 6.1 RPM · 0.6388 rad/s | ×10 |
| 30:1 | 2.033 RPM · 0.2129 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.0204 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.204 J |
| 0.1 kg·m² (car flywheel) | 2.04 J |
| 1 kg·m² (industrial flywheel) | 20.4 J |
Multiples of this speed
- 0.5× = 30.5 RPM3.194 rad/s
- 2× = 122 RPM12.7758 rad/s
- 5× = 305 RPM31.9395 rad/s
- 10× = 610 RPM63.8791 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 61 RPM to radians per second, multiply 61 by π and divide by 30: 61 × (π / 30) = 6.387905 rad/s (approx. 6.388 rad/s).
61 RPM equals 1.0167 Hz (revolutions per second), calculated by dividing 61 by 60 seconds.
To convert 6.388 rad/s back to RPM, multiply by 30 and divide by π: 6.388 × (30 / π) ≈ 61 RPM.
At 61 RPM, one full 360° revolution takes 0.9836 seconds (983.61 ms).
A 4-pole induction motor has a synchronous speed of 61 RPM at 2.0333 Hz (f = RPM × poles / 120 = 61 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 6.387905 rad/s × 0.1 m = 0.6388 m/s (2.2996 km/h). The centripetal acceleration at the rim is ω²·r = 4.0805 m/s².